References
V. I. Petrov and V. F. Chebaevskii,Cavitation in High-Speed Blade Pumps, Mashinostroenie, Moscow (1982).
V. I. Dumov and M. A. Peshkin, “Some results of examination of operation of axial screw wheels,”Energomashinostroenie, No. 2, 9–11 (1992).
G. N. Abramovich,Applied Gas Dynamics [in Russian], Moscow (1969).
Davis, Kuns, and Sheer, “Analysis of flow in rough pumps in cavitation and cavitation-free operating conditions,”Vopr. Raketn. Tekhn., No. 11, 25–29 (1972).
I. V. Shcherbatenko, “Calculation of pressure characteristics of booster pumps,”Teploenergetika, No. 2, 64–70 (1996).
S. V. Kulikov and M. F. Khramkin,Fountain Propellers [in Russian], Sudostroenie, Leningrad (1980).
V. S. Val'chuk, A. N. Papir, and N. A. Shuplev,Prediction of the Cavitation Characteristics of Working Wheels of Axial Pumps [in Russian], Manuscript No. 1082/83, deposited at the Scientific Research Institute of Petrochemical Engineering, Moscow (1983).
V. Ya. Karelin,Cavitation Phenomena in Centrifugal and Axial Pumps [in Russian], Mashgiz, Moscow (1963).
B. I. Borovskii, N. S. Ershov, B. V. Ovsyanikov, et al.,High-Speed Pumps [in Russian], Mashinostroenie, Moscow (1975).
I. V. Shcherbatenko, “Calculating the anti-cavitation properties of screw-centrifugal and axial pumps for the first critical regime,”Énergomashinostroenie, No. 5, 5–8 (1980).
S. M. Belotserkovskii, A. S. Ginevskii, and A. Ya. Polonskii, “Force moment characteristics of the lattices of thin profiles,”Promyshl. Aerodin., No. 128 (1962).
Additional information
OOO RNGSinzhiniring. Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 31–36, June, 1999.
Rights and permissions
About this article
Cite this article
Shcherbatenko, I.V. Prediction of the cavitation characteristics of the screw working wheels of pumps. Chem Petrol Eng 35, 330–337 (1999). https://doi.org/10.1007/BF02361047
Issue Date:
DOI: https://doi.org/10.1007/BF02361047