Advertisement

Materials Science

, Volume 35, Issue 2, pp 245–251 | Cite as

Formation and properties of diffusion coatings applied to steels by boronizing in melts

  • V. V. Shirokov
  • M. I. Kitsak
  • E. T. Rudkovs'kyi
  • L. A. Arendar
Article

Abstract

We propose the optimum modes for the formation of diffusion boride coatings on steels of various classes from liquid-metal melts. The microstructure and physical properties of boronized steels 20, 30, 45, R18, DI22, and U10 are analyzed. The advantages of boronizing from lithium-based melts, which enables one to combine the process of deposition with heat treatment, over the familiar methods of creation of a coating from powder mixtures are established.

Keywords

Microstructure Heat Treatment Structural Material Boride Powder Mixture 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    D. N. Garkunov,Tribotechnique [in Russian], Mashinostroenie, Moscow (1985).Google Scholar
  2. 2.
    V. V. Shyrokov and Yu. I. Koval'chyk, “Simulation of temperature splashes with consideration for the physicomechanical properties of metals,”Fiz.-Khim. Mekh. Mater.,34, No. 3, 36–48 (1998).Google Scholar
  3. 3.
    Yu. I. Koval'chyk,Wiener and Feynman Integrals: Calculation and New Possibilities of Application [in Ukrainian], Vertykal', L'viv (1998).Google Scholar
  4. 4.
    V. P. Glukhov,Boride Coatings on Iron and Steels [in Russian], Naukova Dumka, Kiev (1978).Google Scholar
  5. 5.
    L. S. Yakovlev (editor),Thermochemical Treatment of Metals and Alloys. A Handbook [in Russian], Metallurgiya, Moscow (1981).Google Scholar
  6. 6.
    V. I. Pokhmurskii, V. B. Dalisov, and V. I. Golubets,Extension of the Durability of Machine Parts by Using Diffusion Coatings [in Russian], Naukova Dumka, Kiev (1980).Google Scholar
  7. 7.
    V. F. Shatinskii, O. M. Zbozhnaya, and G. G. Maksimovich,Derivation of Diffusion Coatings in a Medium of a Low-Melting-Point Metal [in Russian], Naukova Dumka, Kiev (1976).Google Scholar
  8. 8.
    G. V. Samsonov, L. Ya. Markovskii, A. F. Zhigan, and M. G. Valyashko,Boron-Its. Compounds and Alloys [in Russian], Naukova Dumka, Kiev (1960).Google Scholar
  9. 9.
    V. V. Shirokov and V. I. Stepanishin, “Technological aspects of the application of slightly activated protective boron-based coatings,” in:Abstracts of the International Conf. on Radioactive Waste, their Storage, Transportation, and Influence on the People and Environment [in Russian], St. Petersburg (1996), p. 13.Google Scholar
  10. 10.
    E. M. Lyutyi, V. V. Shirokov, and V. I. Stepanishin, “Improvement of the heat-resistance of vanadium and VTsU alloy by applying coatings from sodium melt,”Fiz.-Khim. Mekh. Mater. 19, No. 6, 95–96 (1983).Google Scholar
  11. 11.
    V. V. Shyrokov and V. I. Stepanyshyn, “Effect of thermochemical treatment in melts of alkali metals on the mechanical properties of refractory alloys with diffusion heat-resistant coatings,” in:Proceedings of the 4th International Conf.-Exhibition on Problems of Corrosion and Corrosion Protection of Materials “Corrosion-98,” L'viv (1998), pp. 221–223.Google Scholar

Copyright information

© Kluwer Academic/Plenum Publishers 2000

Authors and Affiliations

  • V. V. Shirokov
  • M. I. Kitsak
  • E. T. Rudkovs'kyi
  • L. A. Arendar

There are no affiliations available

Personalised recommendations