References
K. Ando, B. A. Kim, M. Iwasa, and N. Ogura, “Process zone size failure criterion and probabilistic fracture assessment curves for ceramic”,Fatigue Fract. Eng. Mater. Struct.,15, No. 2, 139–149 (1992).
E. M. Morozov, “Threshold crack resistance in nonlinear fracture mechanics”, in:Contemporary Problems of Mechanics and Aviation [in Russian], Mashinostroenie, Moscow (1982), pp. 203–215.
A. R. Dowling and C. H. Townley, “The effect of defect on structural failures: a two-criteria approach”,Int. J. Pressure, Vessels Piping,3, 77–108 (1975).
R. P. Harrison, K. Loosemore, I. Milne, and A. R. Dowling,Assessment of the Integrity of Structure Containing Defects, R/H/R6, Rev. 2, Centr. Electr. Generat. Board, Rep. (1980).
V. V. Novozhilov, “Necessary and sufficient criterion of brittle strength”,Probl. Mat. Mekh.,33, No. 2, 212–222 (1969).
N. F. Morozov,Mathematical Problems in the Theory of Cracks [in Russian], Nauka, Moscow (1984).
R. V. Gol'sdshtein and N. V. Osipenko, “Fracture and formation of structures”,Dokl. Akad. Nauk SSSR,240, No. 4, 829–832 (1978).
Additional information
Smirnov Institute of Mathematics and Mechanics, Russia. Published in Fizyko-Khimichna Mekhanika Materialiv, Vol. 35, No. 1, pp. 112–113, January–February, 1999.
Rights and permissions
About this article
Cite this article
Petrov, Y.V., Taraban, U.V. On process-zone-size fracture criteria for brittle solids. Mater Sci 35, 129–131 (1999). https://doi.org/10.1007/BF02355612
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02355612