Advertisement

Experimental Mechanics

, Volume 27, Issue 4, pp 388–389 | Cite as

An experimental investigation of how accurate simply supported boundary conditions can be achieved in compression testing panels

Paper by Jose Maria Minguez appears in the September 1986 issue ofExperimental Mechanics, pages 238–244
  • Fok Wing Chau
Article

Keywords

Boundary Condition Mechanical Engineer Fluid Dynamics Experimental Investigation Compression Testing 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Moxham, K.E., “Buckling Tests on Individual Welded Steel Plates in Compression,” CUED/C-STRUCT/TR 3 (1971).Google Scholar
  2. 2.
    Bentham, J.P., “The Reduction in Stiffness of Combination of Rectangular Plates in Compression After Exceeding the Buckling Load,” NLL-TR S539.Google Scholar
  3. 3.
    Spencer, H.J. and Walker, A.C., “Techniques for Measuring the Critical Loads of Column and Plates,” presented at 1974 SESA Spring Meeting.Google Scholar
  4. 4.
    Fok, W.C., “Evaluation of Experimental Data of Plate Buckling,” {jtJ. of Eng. Mech.}, {vn110} ({sn4}), (April {dy1984}).Google Scholar
  5. 5.
    Souza, M.A., Fok, W.C. andWalker, A.C., “Review of Experimental Techniques for Thin-Walled Structures Liable to Buckling,”Experimental Techniques,7 (10),36–39 (Oct.1983).Google Scholar

Copyright information

© Society for Experimental Mechanics, Inc. 1987

Authors and Affiliations

  • Fok Wing Chau
    • 1
  1. 1.Nanyang Technological InstituteSchool of Mechanical and Production EngineeringSingapore

Personalised recommendations