Abstract
A hydraulic experimental setup and related instrumentation were developed for testing constitutive models of ideal plastic behavior at large deformations using slow, radial compression of short, hollow cylinders at constant height. At this preliminary stage of development, plasticine rings with initial inner diameters of 25.4 mm were reduced to a final diameter of 9 mm or less. Further development is needed to test first lead and then harder metals.
Similar content being viewed by others
References
Talbert, S.H., “Mechanics of Plastic Flow in Metal Forming: General Solutions for a Class of Ductile Materials,”Adv. Tech. Plasticity,2,961–966 (1984).
Tresca, H.E., “Mémoire sur le poinçonnage des métaux,”Mémoires Présentés par Divers Savants, Académie des Sciences, Paris, Second Series 20, 617–828 (1872).
Saint-Vénant, A.J.C.B., “Sur l'intensité des forces capables de deformer, avec continuité, des blocs ductiles...,”Comptes Rendues de l'Académie des Sciences, Paris,74,1016–1017 (1872).
von Mises, R., “Mechanik der festen Körper in plastisch deformablen Zustand,” Nachrichten der Gesellschaft von Wissenschaften, Göttingen, Math.-physical, Klasse, 582–592 (1913).
Mao-hong, Y., “Twin Shear-stress Yield Criterion,”Int. J. Mech. Sci.,25,71–74 (1983).
Singh, A.P. andPadmanabhan, K.A., “Axi-symmetric Compression of Solid Cylinders: Part I—Slow Loading Conditions,”J. Mat. Sci.,26,5481–5487 (1991).
Johnson, G.R., Hoegfeldt, J.M., Lindholm, U.S., andNagy, A., “Response of Various Metals to Large Torsional Strains over a Large Range of Strain Rates-Part I: Ductile Metals,”Trans. ASME J. Eng. Mat. Tech.,105,42–47 (1983).
Pöhlandt, K. andTekkaya, A.E., “Torsion Testing—Plastic Deformation to High Strains and Strain Rates,”Mat. Sci. Tech.,1,972–977 (1985).
Talbert, S.H., “Slow Frictionless Ring Forming: Exact Solutions for a Wide Class of Ductile Materials,”J. Franklin Inst.,317,275–278 (1984).
Talbert, S.H., “Slow Frictionless Ring Forming: Further Exact Solutions for a Wide Class of Ductile Materials,”J. Franklin Inst.,322,103–126 (1986).
Aku, S.Y., Slater, S.A.C., andJohnson, W., “The Use of Plasticine to Simulate the Dynamic Compression of Prismatic Blocks of Hot Metal,”Int. J. Mech. Sci.,9,495–525 (1967).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lamparter, B., Talbert, S. & Tavoularis, S. A radial compression test for plastic flow studies. Experimental Mechanics 40, 7–9 (2000). https://doi.org/10.1007/BF02327541
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02327541