Abstract
Elastic wave propagation fields for a stationary crack in an Izod fracture specimen have been investigated. Moiré interferometry was used to obtain the asymptotic cracktip displacement fields under Hopkinson bar loading at sampling rates on the order of 100 kHz. Mixed-mode stress-intensity factors as a function of time were extracted from the displacement data using local asymptotic extrapolation. Two-dimensional continuum finite elements were employed and agreement was found between actual experiment and two-dimensional computation.
Similar content being viewed by others
References
Freund, L.B., “Crack Propagation in an Elastic Solid Subjected to General Loading — III. Stress Wave Loading,”J. Mech. and Phys. of Solids,21,47–61 (1973).
Elastodynamic Crack Problems, Mechanics of Fracture, ed. G.C. Sih, Noordhoff International Publishing, Leyden (1977).
Nishioka, T. and Atluri, S.N., “Computational Methods in Dynamic Fracture,” Computational Methods in the Mechanics of Fracture, ed. S.N. Atluri, Chapt. 10, North-Holland (1986).
Kobayashi, A.S. andMall, S., “Dynamic Fracture Toughness of Homalite-100,”Experimental Mechanics,18 (1),11–18 (1978).
Shukla, A. and Chona, R., “The Stress Field Surrounding a Rapidly Propagating Curving Crack,” Fracture Mechanics: Eighteenth Symposium, ASTM STP 945, 86–99 (1988).
McConnell, P.E. and Server, W.L., “EPRI Instrumented Impact Procedures,” C.S.N.I. Specialist Meeting on Instrumented Precracked Charpy Testing, EPRI NP-2102-LD (Nov. 1981).
Kalthoff, J.F., Winkler, S., Bohme, N. and Klemm, W., “Measurements of Dynamic Stress Intensity Factors in Impacted Bend Specimen,” loc. cit.
Kobayashi, A.S., Ramulu, M. andMall, S., “Impacted Notch Bend Specimens,”J. Press. Vessel Tech.,104,25–30 (1982).
Sih, G.C., “Dynamic Crack Problems: Strain Energy Density Fracture Theory,”Elastodynamic Crack Problems, ed. G.C. Sih, Chapts. 5 and 6, Noordhoff International, Leyden, 17–37 (1977).
Swenson, D.V., “Modeling Mixed-Mode Dynamic Crack Propagation Using Finite Elements,”Dept. of Structural Engineering Report Number 85-10, Civil and Environmental Engineering, Cornell Univ., Ithaca, NY (Dec. 1985).
Chona, R., “The Stress Field Surrounding the Tip of a Crack Propagating in a Finite Body,” PhD Diss., Univ. of Maryland (1987).
Kalthoff, J.F., “Shadow Optical Analysis of Dynamic Shear Fracture,”Proc. SPIE, The Int. Soc. for Opt. Eng.,814,pt. 2,531–538 (1988).
ASTM E-23, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Philadelphia, PA, 16 (1988).
Ibid. ASTM E-23, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Philadelphia, PA, 16 (1988).
C.S.N.I. Special Meeting on Instrumented Precracked Charpy Testing, EPRI-NP 2102 LD, ed. R.A. Wulkert (1981).
Curran, R.S.J., Mines, R.A.W. and Ruiz, C., “Elastic Impact Loading of Notched Beams and Bars,” Int. J. Fract., 129–144 (1983).
Mines, R.A.W. and Ruiz, C., “Assessment of Dynamic Methods for the Measurement of Fracture Toughness,” Oxford Univ. Rep. OUEL 1561/85 (1985).
Kobayashi, A., Harris, D.O. andEngstrom, W.L., “Transient Analysis in a Fracturing Magnesium Plate,”Experimental Mechanics,7 (10),434–440 (Oct. 1967).
Huntley, J.M. and Field, J.E., “Application of Moiré Photography to the Study of Dynamic Fracture,” Proc. 7th Int. Conf. on Fracture, ed. K. Salama et al., 771–779 (1989).
Post, D., “Moiré Interferometry,” Handbook on Experimental Mechanics, ed. A. Kobayashi, SEM, Chapt. 7 (1987).
Livnat, A. andPost, D., “The Grating Equations for Moiré Interferometry and Their Identity to Equations of Geometrical Moiré,”Experimental Mechanics,25 (4),360–367 (1985).
Deason, V.A. and Epstein, J.S., “Diffraction Moiré: The Dynamic Regime,” SPIE O-E LASER (1987).
Deason, V.A., Epstein, J.S. andAbdallah, M., “Dynamic Diffraction Moiré: Theory and Applications,”Optics and Lasers in Eng.,12,173–187 (1990).
Rowlands, R.E., Taylor, C.E. and Daniel, I.M., “A Multi-pulse Ruby-laser System for Dynamic Photomechanics: Applications to Transmitted and Scattered Light Photoelasticity,” Experimental Mechanics,385–393 (Sept. 1969).
Deason, V.A., Ward, M.B. and Epstein, J.S., “High Repetition Rate Interferometry Using a Ruby Laser and a Cordin Model 360 Camera,” 19th Int. Cong. on High Speed Photography and Photonics, Cambridge, England, 16–21 (1990).
Parker, N.L. and Chau, H.H., “Streak Camera Recording of Interferometer Fringes,” NTIS, UCID-17531, LLNL (July 1977).
Kobayashi, A. andMall, S., “Dynamic Fracture Toughness of Homalite 100,”Experimental Mechanics,18 (1),11–19 (1978).
Williams, M.L., “On the Stress Distribution at the Base of a Stationary Crack,”J. Appl. Mech., Trans. ASME,37,Series E (2),409–415 (1957).
Vasilopoulos, D., “On the Determination of Higher Order Terms of Singular Stress Fields Near Corners,”Num. Math.,53,51–59 (1988).
Bhattacharya, A. andKishor, B., “Rigid Body Rotation Surrounding the Crack,”Eng. Fract. Mech.,30,451–459 (1988).
Bhattacharya, A., “Rigid Body Rotation Surrounding the Mode II Crack,”Eng. Fract. Mech.,36 (6),941–947 (1989).
Owen, D.R.J. and Hinton, E., Finite Elements in Plasticity: Theory and Practice, Pineridge Press Ltd. (1980).
Barsoum, R.S., “Triangular Quarter-Point Elements as Elastic and Perfectly-Plastic Crack Tip Elements,” Int. J. Num. Meth. Eng., 85–98 (1977).
Smith, C.W., Epstein, J.S. andRezvani, M., “Measurement of Dominant Eigenvalues in Cracked Body Problems,”Int. J. Fract.,39,15–24 (1989).
Benthem, J.P., “The Quarter-Infinite Crack in a Half Space; Alternative and Additional Solutions,”Int. J. Solids Struct.,16,119–130 (1980).
Rosakis, A.J. andRavi-Chandar, K., “On Crack-tip Stress State: An Experimental Evaluation of Three-dimensional Effects,”Int. J. Solids & Struct.,22,121–134 (1986).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jung, H.Y., Epstein, J.S., Deason, V.A. et al. Long wavelength impact of izod fracture specimens: An experimental/numerical investigation. Experimental Mechanics 31, 281–287 (1991). https://doi.org/10.1007/BF02326073
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02326073