This is a preview of subscription content, log in via an institution to check access.
References
1879 Bauschinger, Johann, “Über die Quercontraction und Dilatation bei der Längenausdehnung und Zusammendruckung prismatischer Körper,”Civilingenieur, Leipzig,25,81–124.
1886 Bauschinger, Johann, “Über die Veränderung der Elasticitätsgrenze und Festigkeit des Eisen und Stahls durch Strecken und Quetschen, durch Erwarmen und Abkühlen und durch oftmal wiederholte Beanspruchung.” Mitteilungen aus dem mechanisch-technischen Laboratorium der k. polytechnischen Schule, Heft 7–14 (1877–1836); Heft 13,1–115.
1900 Guest, James J., “On the Strength of Ductile Materials Under Combined Stress,”Phil. Mag., fifth series,50,69–132.
1921 Carpenter, H.C.H. andElam, C., “The Production of Single Crystals of Aluminium and Their Tensile Properties,”Proc. Roy. Soc. (London),100 A 329–355.
1925 Bridgman, P.W., “Certain Physical Properties of Single Crystals of Tungsten, Bismuth, Tellurium, Cadmium, Zinc, and Tin,”Proc. Am. Acad. Arts. Sci.,60,305–383.(First presented in October 1924.).
1926 Elam, C.F., “Tensile Tests of Large Single Crystals of Gold, Silver, and Copper Crystals.”Proc. Roy. Soc. (London) Ser.A. 112,289–296.
1926 Lode, W., “Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle Eisen, Kupfer, und Nickel.”Z. Physik,36,913–939.
1927 Göler, V. andSachs, G.O., “Das Verhalten von Aluminiumkristallen bei Zugversuchen. I. Geometrische Grundlagen,”Z. Physik,41,103–115.
1927 Karnop, R. andSachs, G., “Das Verhelten von Aluminiumkristallen bei Zugversuchen,”Z. Physik,41,116.
1932 Thiele, W., “Temperaturabhängigkeit der Plastizität und Zugestigkeit von Steinsalkrystallen,”Z. Physik 75,763–776.
1935 Schmid, E. andBoas, W., Krystallplastizitaet, J. Springer, Berlin.
1942 Karman, T. von, “On the Propagation of Plastic Deformation in Solids.” NDRC Report A29, ORSD 365.
1942 White, M and Griffis, LeVan, “The Permanent Strain in a Uniform Bar Due to Longitudinal Impact,” NDRC (Progress report No. 7) OSRD No. 742.
1945 Rakhmatulin, K., “Propagation of a Wave of Unloading,”Sov. J. Appl. Mathematics and Mechanics (Prikl. Mat. Mech.) 9 (1)91.
1946 Karman, T. von and Duwez P., “The Propagation of Plastic Waves in Solids.” Sixth Int. Cong. for Appl. Mech. Paris, France. (September).
1946 Bridgman, P.W., “Studies of Plastic Flow of Steel, Especially Two-dimensional Compression,”J. Appl. Physics,17,225–243.
1948 White, M andGriffis, LeVan, “The Propagation of Plasticity in Uniaxial Compression,”Trans. Am. Soc. Mech. Engrs.,70,256–260.
1951 Bell, J.F., “Propagation of Plastic Waves in Pre-stressed Bars.”U. S. Navy Technical Report No. 5, Baltimore, The Johns Hopkins Univ.
1951 Bishop, J. andHill, R., “A Theoretical Derivation of the Plastic Properties of Polycrystalline Face-centred Metals,”Phil. Mag. 42,1298–1307.
1951 Bishop, J. andHill, R., “A Theory of Plastic Distortion of a Polycrystalline Aggregate Under Combined Stresses,”Phil. Mag. 42,414–427.
1952 Barrett, C., Structure of Metals.McGraw Hill, N.Y., Toronto, London.661p
1956 Bell, J.F., “Determination of Dynamic Plastic Strain Through the Use of Diffraction Gratings.”J. Appl. Phys.,27 (10)1109–1113.
1958 Bell, J.F., “Normal Incidence in the Determination of Large Strain Through the Use of Diffraction Gratings.” Proc. 3rd U.S. Nat. Cong. of Appl. Mech., Brown Univ., Providence, Rhode Island, U.S.A., 489–493.
1958 Taylor, G.I., The Scientific Papers of Sir Geoffery Ingram Taylor, I: Mechanics of Solids, edited by George K. Batchelor, Cambridge University Press, Cambridge, England.
1958 Seeger, A., “Kristallplastizität”Handbuch der Physik, VII/2, 1–210.Springer Verlag, Berlin, Gottingen, Heidelberg.
1960 Bell, J.F., “The Diffraction Grating Strain Gauge,”Proc. Soc. Exp. Stress Anal.,17 (2),51–64.
1960 Bell, J.F., “Propagation of Large Amplitude Waves in Annealed Aluminum.”J. Appl. Phys.,31 (2),277–282.
1961 Bell, J.F., “An Experimental Study of the Interrelation Between the Theory of Dislocations in Polycrystalline Media and Finite Amplitude Wave Propagation in Solids.”J. Appl. Phys.,32 (10),1982–1993.
1962 Bell, J.F. andWerner, M., “Applicability of the Taylor Theory of the Polycrystalline Aggregate to Finite Amplitude Wave Propagation in Annealed Copper.”J. Appl. Phys.,33 (8),2416–2415.
1962 Dillon, O., Jr., “An Experimental Study of the Heat Generated During Torsional Oscillations.”J. Mech. and Phys. of Solids,10,235–244.
1962 Dillon, O. Jr., “Temperature Generated in Aluminum rods Undergoing Torsional Oscillations.,”J. Appl. Phys.,33 (10),3100–3105.
1963 Bell, J.F., “Single Temperature Dependent Stress-Strain Law for the Dynamic Plastic Deformation of Face Centered Cubic Metals.”J. Appl. Phys.,34 (1),131–141.
1964 Bell, J.F., “A Generalized Large Deformation Behaviour for Face-centred Cubic Solids—High Purity Copper.”Phil. Mag. 10 (103),107–126.
1965 Bell, J.F., “Generalized Large Deformation Behaviour for Face Centred Cubic Solids—Nickel, Aluminum, Gold, Silver, and Lead.”Phil. Mag.,11 (114),1135–1156.
1967 Bell, J.F. andGreen, R.E., “An Experimental Study of the Double Slip Hypothesis for Face-centred Cubic Single Crystals.”Phil. Mag. 15,469–476.
1968 Sierakowski, R. andPhillips, A., “The Effect of Repeated Loading on the Yield Surface.”Acta Mechanica,6,217–231.
1968 Bell, J.F., The Physics of Large Deformation of Crystalline Solids. Springer Tracts in Natural Philosophy,14,Berlin, Heidelberg, N.Y.
1969 Reifsnider, K. andGreen, R., “Dynamic X-ray Diffraction Study of the Deformation of Aluminum Crystals.”Trans. of the Metallurgical Soc. of AIME,245,1615–1619.
1973 Moon, H., “An Experimental Study of the Outer Yield Surface and of the Incremental Response Function in the Totally Plastic Region for Annealed Polycrystalline Aluminum.” PhD Dissertation, The Johns Hopkins University, Department of Mechanics.
1973 Bell, J.F., “The Experimental Foundations of Solid Mechanics.”Handbuch der Physik, VIa/1, 1–813, Springer Verlag, Berlin, Heidelberg, N. Y. Reprinted (Springer-Verlag 1984) with the title Mechanics of Solids,I:James F. Bell. Also reprinted in Russian translation (NAUKA: 1984).
1975 Moon, H., “An Experimental Study of the Outer Yield Surface for Annealed Polycrystalline Aluminum.”Acta Mechanica,23,191–208.
1981 Bell, J.F., “A Physical Basis for Continuum Theories of Finite Strain Plasticity: Part II.”Archive for Rational Mechanics and Analysis,75,103–126.
1983 Bell, J.F., “Continuum Plasticity at Finite Strain for Stress Paths of Arbitrary Composition and Direction.”Archive for Rational Mechanics and Analysis,84, (2),139–170.
1985 Bell, J.F., “Contemporary Perspectives in Finite Strain Plasticity.”Intl. J. of Plasticity,1,3–27.
1986 Phillips, A., “A Review of Quasistatic Experimental Plasticity and Viscoplasticity.”Intl. J. of Plasticity,2 (4),315–328.
1987 Bell, J.F., A Confluence of Experiment and Theory for Waves of Finite Strain in the Solid Continuum.”Inst. Math. & its Applications, U. Minnesota, Ser. #151:In J. Bona, et al. eds., Dynamical Problems in Continuum Physics, 91–130, Springer, N.Y.
1988 Bell, J.F., “Plane Stress, Plane Strain, and Pure Shear at Large Plastic Strain in Ordered Solids.”Intl. J. of Plasticity,4 (2),127–148.
1989 Bell, J.F., “Experiments on the Kinematics of Large Finite Plastic Strain in Ordered Solids.”Intl. J. Solids and Structures,25 (3),267–278.
1990 Bell, J.F., “Material Objectivity in an Experimentally Based Incremental Theory of Large Finite Strain.”Intl. J. of Plasticity,6 (3),293–314.
Additional information
This paper was reviewed and proposed for publication in EXPERIMENTAL MECHANICS by four SEM Past Presidents/Fellows. It is a comprehensive chronology of the work of G. I. Taylor
The late James F. Bell was Professor Emeritus, The Johns Hopkins University, Department of Mechanics, Latrobe Hall, Charles and 34th Streets, Baltimore, MD 21218.
Rights and permissions
About this article
Cite this article
Bell, J.F. A retrospect on the Contributions of G.I. Taylor to the continuum physics of solids. Experimental Mechanics 35, 1–10 (1995). https://doi.org/10.1007/BF02325827
Issue Date:
DOI: https://doi.org/10.1007/BF02325827