Load and stress distribution in screw threads

Abstract

The load distribution and the normalized stress distribution in the threads of an ISO metric nut and bolt were found by frozen-stress photoelastic analysis employing a fringe-multiplying polariscope in conjunction with a recording microdensitometer. Previous investigators assumed that these distributions were identical, whereas the present study shows that this is not the case. It has been further shown that deducing the load distribution from measurements of the nut deformation is unsatisfactory. The results of the reported method correlate closely with Sopwith's theoretical load distribution. Three recent finite-element analyses of nut-bolt systems have been compared indirectly to the experimental load distribution. That of Bretl and Cook was found to give the best comparison.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    Den Hartog, J.P., “The Mechanics of Plate Rotors for Turbogenerators,” Trans. ASME,51,Paper No. APM 51-1 (1929).

  2. 2.

    Goodier, J.H., “Distribution of Load on Threads of Screws,”Trans. ASME,62,A10-A16 (1940).

    Google Scholar 

  3. 3.

    Hetényi, M., “The Distribution of Stress in Threaded Connections,”Exp. Stress Anal.,1 (1),147–156 (1943).

    Google Scholar 

  4. 4.

    Sopwith, D.G., “The Distribution of Load in Screw Threads,”Inst. Mech. Engrs. Appl. Mech. Proc.,159,373–383 (1948).

    Google Scholar 

  5. 5.

    Brown, A.F.C. andHickson, V.M., “A Photoelastic Study of Stresses in Screw Threads,”Proc. I. Mech. Eng.,1B,605–612 (1952).

    Google Scholar 

  6. 6.

    Maruyama, K., “Stress Analysis of a Bolt-Nut Joint by the Finite Elements and Copper-Electroplating Technique,”Bul. JSME,17 (106),442–450 (1974).

    Google Scholar 

  7. 7.

    Bretl, J.L. andCook, R.D., “Modelling Load Transfer in Threaded Connections by the Finite Element Method,”Int. J. Number. Methods Eng.,14 (9),1359–1377 (1979).

    Google Scholar 

  8. 8.

    Tanaka, M., Miyazawa, H., Asaba, E. andHongo, K., “Application of the Finite Element Method to Bolt-Nut Joints,”Bul. JSME,24 (192),1064–1071 (1981).

    Google Scholar 

  9. 9.

    Tanaka, M., Hongo, K. andAsaba, E., “Finite Element Analysis of Threaded Connections Subjected to External Loads,”Bul. JSME,25 (200),291–298 (1982).

    Google Scholar 

  10. 10.

    Fessler, H. andJobson, P.K., “Stresses in Bottoming Stud Assembly with Chamfers at the End of the Thread,”J. Strain Anal.,18 (1),15–22 (1983).

    Google Scholar 

  11. 11.

    Kenny, B. andPatterson, E.A., “The Use of a Microdensitometer for Photoelastic Analysis,”Strain,21 (1),13–19 (1985).

    Google Scholar 

  12. 12.

    British Standards Institution, “Specification for ISO metric screw threads, Part 1. Principles and basic data,” BS. 3643 (1981).

  13. 13.

    Allison, I.M., “Extrapolation Methods for Evaluating Boundary Stresses,”Brit. J. Appl. Phys.,16,93–99 (1965).

    Google Scholar 

  14. 14.

    Cox, M.G., “A Survey of Numerical Methods for Data and Function Approximation,”The State of the Art in Numerical Analysis, Academic Press, London, 627–668 (1977).

    Google Scholar 

  15. 15.

    Frocht, M.M., “Photoelasticity,”1,Ch. 8,252–322,John Wiley and Sons,New York (1940).

    Google Scholar 

  16. 16.

    Hollister, G.S., “Experimental Stress Analysis,”178–179, University Press, Cambridge (1967).

    Google Scholar 

  17. 17.

    Stoeckly, E.E. andMacke, H.J., “Effect of Taper on Screw Thread Load Distribution,”Trans. ASME,74 (1),103–112 (1952).

    Google Scholar 

Download references

Author information

Affiliations

Authors

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Kenny, B., Patterson, E.A. Load and stress distribution in screw threads. Experimental Mechanics 25, 208–213 (1985). https://doi.org/10.1007/BF02325089

Download citation

Keywords

  • Mechanical Engineer
  • Fluid Dynamics
  • Stress Distribution
  • Good Comparison
  • Load Distribution