Advertisement

Experimental Mechanics

, Volume 41, Issue 2, pp 182–189 | Cite as

Nonlinear behavior of composite sandwich beams in three-point bending

  • E. E. Gdoutos
  • I. M. Daniel
  • K.-A. Wang
  • J. L. Abot
Article

Abstract

The load-deflection behavior of a composite sandwich beam in three-point bending was investigated. The beam was made of unidirectional carbon/epoxy facings and a polyvinyl chloride closed-cell foam core. The load-deflection curves were plotted up to the point of failure initiation. They consist of an initial linear part followed by a nonlinear portion. A nonlinear mechanics of materials analysis that accounts for the combined effect of the nonlinear behavior of the facings and core materials (material nonlinearity) and the large deflections of the beam (geometric nonlinearity) was developed. The theoretical predictions were in good agreement with the experimental results. It was found that the effect of material nonlinearity on the deflection of the beam is more pronounced for shear-dominated core failures in the case of short span lengths. It is due to the nonlinear shear stress-strain behavior of the core. For long span lengths, the observed nonlinearity is small and is attributed to the combined effect of the facings nonlinear stress-strain behavior and the large deflections of the beam.

Key words

Sandwich beams material nonlinearity geometric nonlinearity bending fiber composites cellular foams 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Plantema, F.J., Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates and Shells, John Wiley & Sons, New York (1966).Google Scholar
  2. 2.
    Allen, H.G., Analysis and Design of Structural Sandwich Panels, Pergamon Press, London (1969).Google Scholar
  3. 3.
    Zenkert, D., An Introduction to Sandwich Construction, Chameleon Press, London (1995).Google Scholar
  4. 4.
    Vinson, J.R., “Sandwich Structures,” Plenary Speech, 14th Annual Conference of the American Society for Composite Materials, Dayton, OH (Sept. 1999).Google Scholar
  5. 5.
    Hoff, N.J. andMautner, S.E., “Bending and Buckling of Sandwich Beams,”J. Aerosp. Sci.,15,707–720 (1948).Google Scholar
  6. 6.
    Krajcinovic, D., “Sandwich Beam Analysis,”J. Appl. Mech. Trans. ASME,38,773–778 (1971).Google Scholar
  7. 7.
    Krajcinovic, D., “Sandwich Beams with Arbitrary Boundary Conditions,”J. Appl. Mech. Trans. ASME,42,873–880 (1975).Google Scholar
  8. 8.
    DiTaranto, R.A., “Static Analysis of a Laminated Beam,”J. Eng. Ind. Trans. ASME,95,755–761 (1973).Google Scholar
  9. 9.
    Rao, D.K., “Static Response of Stiff-cored Unsymmetric Sandwich Beams,”J. Eng. Ind. Trans. ASME,98,391–396 (1976).Google Scholar
  10. 10.
    Frostig, Y. andShenhar, Y., “High-order Bending of Sandwich Beams with a Transversely Flexible Core and Unsymmetrical Laminated Composite Skins,”Composites Eng.,5,405–414 (1995).Google Scholar
  11. 11.
    Salamon, N.J., “Stress Distribution in Sandwich Beams in Uniform Bending,” ASTM STP 734, ed. C.C. Chamis, ASTM, 166–177 (1981).Google Scholar
  12. 12.
    Bardell, N.S. andGange, G.J., “An Efficient Static Analysis of Sandwich Beams,”Composite Struct.,29,107–117 (1994).CrossRefGoogle Scholar
  13. 13.
    Gordaninejad, F. andBert, C.W., “A New Theory for Bending of Thick Sandwich Beams, Int. J. Mech. Sci.,31,925–934 (1989).CrossRefGoogle Scholar
  14. 14.
    Reimerdes, H.-G. andSchermann, T., “A Higher Order Theory for the Non-linear Analysis of Thick Sandwich Beams,”Proceedings of the Fourth International Conference on Sandwich Construction,1,350–361 (1998).Google Scholar
  15. 15.
    Cook, G.M., “A Higher-order Bending Theory for Laminated Composite and Sandwich Beams,” NASA Contractor Report No. 201674 (1997).Google Scholar
  16. 16.
    Teti, R. and Caprino, G., “Mechanical Behavior of Structural Sandwiches,” Proceedings of the First International Conference on Sandwich Construction, 53–67 (1989).Google Scholar
  17. 17.
    Johnson, A.F. andSims, G.D., “Mechanical Properties and Design of Sandwich Materials,”Composites,17,321–328 (1986).Google Scholar
  18. 18.
    Lingaiah, K. andSuryanarayana, B.G., “Strength and Stiffness of Sandwich Beams in Bending,” EXPERIMENTAL MECHANICS,31,1–7 (1991).CrossRefGoogle Scholar
  19. 19.
    Mines, R.A.W., Worrall, C.M., andGibson, A.G., “The Static and Impact Behavior of Polymer Composite Sandwich Beams,”Composites,25,95–110 (1994).CrossRefGoogle Scholar
  20. 20.
    Conway, H.D., “The Large Deflection of Simply Supported Beams,”Phil. Mag.,38,905–911 (1947).MathSciNetGoogle Scholar
  21. 21.
    Frisch-Fay, R., Flexible Bars, Butterworth, Washington, DC (1962).Google Scholar

Copyright information

© Society for Experimental Mechanics, Inc. 2001

Authors and Affiliations

  • E. E. Gdoutos
    • 1
  • I. M. Daniel
    • 1
  • K.-A. Wang
    • 1
  • J. L. Abot
    • 1
  1. 1.Departments of Civil and Mechanical EngineeringNorthwestern UniversityEvanston

Personalised recommendations