Abstract
This technical note describes a simple method for using the nickel meshes with up to 2000 lines/in. (lpi) as masks for producing moiré grids. The main advantages, when compared with other methods, are the substantial increase in the speed of application and the precision of the reproduced grid.
Similar content being viewed by others
References
Luxmoore, A. R., “The Moiré Effect Applied to Experimental Stress Analysis,”Jnl. BSSM,5,164–170 (1969).
Dew, G. D., “On Preparing Plastic Copies of Diffraction Gratings; an Extension to the Merton-N. P. L. Process,”Jnl. Sci. Inst.,33,348–352 (1956).
Middleton, E. andStephenson, L. P., “A Reflex Spectrographic Technique for In-plane Strain Analysis,”Experimental Mechanics,8 (1),19–24 (1968).
Luxmoore, A. R., “Metal Crid for the Moiré Technique of Strain Measurement,”Inl. BSSM,3,23–24 (1967).
Kerbser, R. L. andWhittier, J. S., “Moiré Interferometry and Embedded Grids-Effects of Optical Refraction,Experimental Mechanics,9 (5),203–209 (1969).
Luxmoore, A. R. andHermann, R., “Stencil Methods for Preparing Moiré Grids,”Jnl. BSSM,6,115–119 (1970).
McCall, J. L. andBoyd, J. E., “A Method of Applying Fine Grids to Metal Surfaces for Moiré Microstrain Studies,”Jnl. Sci. Inst.,43,612–613 (1966).
McCall, J. L., Private communication.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Luxmoore, A.R., Hermann, R. The rapid deposition of moiré grids. Experimental Mechanics 11, 375–377 (1971). https://doi.org/10.1007/BF02320540
Issue Date:
DOI: https://doi.org/10.1007/BF02320540