Skip to main content
SpringerLink
Log in

The ductile fracture of polycarbonate

Paper indicates that polycarbonate obeys the model of ductile yielding by comparing measured plastic-zone sizes and displacements to the theoretical predictions

  • Published:
Experimental Mechanics Aims and scope Submit manuscript

Abstract

The fracture of a known ductile polymer (polycarbonate) is investigated. It is shown that polycarbonate obeys the Dugdale model of ductile yielding by comparing measured plastic-zone sizes and displacements to the theoretical predictions. Strain-energy release rates are calculated and the critical value is shown to be one or two orders of magnitude higher than critical values for brittle polymers.

Photoelastic photographs of the fracture process are presented and it is shown that the photoelastic effect definitely enhances the definition of the yield zone. Microscopic photoelastic photographs are also presented which are used to give a new interpretation to the photoplastic effect. Finally, suggestions for future work are presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Fracture Toughness Testing and Its Application, ASTM Specia Publication No. 381, ASTM (1965).

  2. Andrews, E. H., Fracture of Polymers, American Elsevier (1968).

  3. Lindsey, G. H., “Viscoelastic Fracture: An Expository Treatment of Polymer Failure,” U. S. Naval Post Graduate School Report AD 666316 (1967).

  4. Brill, W. A., “Basic Studies in Photoplasticity,” PhD Thesis, Stanford University (1965).

  5. Field, F. A., “Plastic Energy Dissipation in Crack Propagation,” PhD Thesis, Stanford University (1962).

  6. Goodier, J. N. and Field, F. A., “Plastic Energy Dissipation in Crack Propagation,” Fracture of Solids, D. C. Drucker, ed., 20 (1963).

  7. Dugdale, D. S., “Yielding of Steel Sheets Containing Slits,” Jnl. Mech. Phys. Solids, 8 (1960).

  8. Foreman, R. G., “Effect of Plastic Deformation on the Strain Energy Release Rate in a Centrally Notched Plate Subjected to Uniaxial Tension,” Jnl. of Basic Engineering (March, 1966).

  9. Hahn, G. T. and Rosenfield, A. R., “Local Strain Measurement,” Final Report, Project SR-164, Contract Nobs-92383, Battelle Memorial Institute (May 1968).

  10. Hetényi, M., “A Study in Photoplasticity,” Proc. First Natl. Cong., appl. Mech. (1952).

  11. Gerberich, W. M., “Plastic Strains and Energy Density in Cracked Plates: Part I Experimental Techniques and Results,”Experimental Mechanics,4 (11),335–344 (1964).

    Article  Google Scholar 

  12. Gerberich, W. M. andSwedlow, J. L., “Plastic Strains and Energy Density in Cracked Plates: Part II. Comparison with Elastic Theory,”Experimental Mechanics,4 (12),345–351 (1964).

    Google Scholar 

  13. Hahn, G. T., Kanninen, M. F., and Rosenfield, A. R., “Ductile Crack Extension and Propagation in Steel Foil”, 2nd Internatl. Conf. on Fracture, Brighton, U.K. (April 13–18, 1969).

  14. Gurtman, G. A., Jenkins, W. C., and Tung, T. K., “Characterization of a Birefringent Material for Use in Photoelasto-Plasticity,” Douglas Report SM-47796 (January, 1965).

Download references

Author information

Authors and Affiliations

  1. Department of Engineering Mechanics, Virginia Polytechnic Institute, Blacksburg, Va

    Halbert F. Brinson (Associate Professor)

Authors
  1. Halbert F. Brinson
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Brinson, H.F. The ductile fracture of polycarbonate. Experimental Mechanics 10, 72–77 (1970). https://doi.org/10.1007/BF02320135

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02320135

Keywords

Search

Navigation