Abstract
The purpose of this study is to develop a method for measuring elastic constants using a LFB acoustic microscope. For this purpose, a theoretical procedure for the estimation of Young's modulus and Poisson's ratio is introduced based on elastic theory. According to this procedure, experimental velocity measurement and elastic constants estimation are made by use of a LFB acoustic microscope. For the confirmation of the availability of this method, the estimated elastic constant is compared to measurements of elastic constants by other methods. The resulting estimated values of Young's modulus and Poisson's ratio obtained by the LFB acoustic microscope are highly accurate which confirms the usefulness of the elastic constant measurement system.
Similar content being viewed by others
References
Krautkramer, J. andKrautkramer, H., Ultrasonic Testing of Materials, 3rd Ed., Springer-Verlag, New York, 580 (1983).
Weglein, R.D., “A Model for Predicting Acoustic Material Signatures,”Appl. Phys. Lett.,34,179–181 (1979).
Atalar, A., “A Physical Model for Acoustic Signature,”J. Appl. Phys.,50,8237–8239 (1979).
Kushibiki, J., Ohkubo, A. andChubachi, N., “Linearly Focused Acoustic Beams for Acoustic Microscopy,”Electron. Lett.,17,520–522 (1981).
Kushibiki, J. and Chubachi, N., “Material Characterization by Line-Focus-Beam Acoustic Microscope,” IEEE Trans. Sonics. Ultrason., SU-32, 189–212 (1985).
Obata, M., Shimada, H. andMihara, T., “Stress Dependence of Leaky Surface Wave on PMMA by Line-focus-beam Acoustic Microscope,”Experimental Mechanics,30,32 (1990).
Viktorov, I.A., Rayleigh and Lamb Waves, Plenum Press, New York Chapt. 1, 46–48 (1967).
Additional information
T. Mihara is Research Associate, and M. Obata (former SEM Member), deceased, was Professor, Department of Materials Processing, Faculty of Engineering, Tohoku University, Aramaki Aoba, Sendai, 980, Japan.
Rights and permissions
About this article
Cite this article
Mihara, T., Obata, M. Elastic constant measurement by using line-focus-beam acoustic microscope. Experimental Mechanics 32, 30–33 (1992). https://doi.org/10.1007/BF02317981
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02317981