Abstract
A structure for the lining of a tundish ladle made from domestic refractory materials is suggested in which the heat loss is less than in linings from imported materials. The hydrodynamics of the liquid pool depends on the ladle profile and the structure of the interstrand partitions. The best results (absence of stagnation pockets along the ladle length) are obtained when the partitions height varies betweenH/3 andH/7 from the second to the fourth partition and the partitions are arranged at 1/4 of the interaxial distance to the strand behind the partition.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 6, pp. 25 – 27, June, 1994.
Rights and permissions
About this article
Cite this article
Aizatulov, R.S., Marakulin, Y.A., Presnyakov, A.P. et al. Design of tundish ladle lining on the basis of thermal and hydraulic modeling. Refractories 35, 202–204 (1994). https://doi.org/10.1007/BF02307159
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02307159