Abstract
This paper presents the quantitative application of the Metal Blocked Differential Thermal Analysis (MBDTA). Calibrations have been electrically carried out by using three types of calibration heaters (pen, ring and spiral), which are placed inside the sample. By means of this arrangement, thermophysical properties of the samples make the quantitative evaluation of the results easy. The influence of the size and sample diameter, the types of heater, the space between heater and thermocouple, in other words, the factors affecting calibration and the effect of the heat transfer geometry on the determination of the fusion heat have been investigated.
Zusammenfassung
Vorliegende Arbeit stellt eine quantitative Anwendung der Metallblock-DTA (MBDTA) dar. Es wurden elektrisch Kalibrationen mit verschiedenen, innerhalb der Probe befindlichen Kalibrationserhitzern (Stift, Ring, Spirale) durchgeführt. Mit Hilfe dieser Anordnung wird die Auswertung der Ergebnisse durch die thermophysischen Eigenschaften der Probe erleichtert. Es wurde der Einfluß von Größe und Probendurchmesser, von Erhitzertyp, von Abstand zwischen Erhitzer und Thermoelement, mit anderen Worten von denjenigen Faktoren, die die Kalibration beeinflussen sowie der Einfluß der Wärmetransportgeometrie auf die Bestimmung der Schmelzwärme untersucht.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
F. C. Kracek, J. Phys. Chem., 34 (1930) 225.
S. Speil, U.S. Bur. Mines Rept. Invest. No. 3764 (1944).
O. Alpaut and Th. Heuman, Acta Met., 13 (1965) 543.
G. Widmann, Thermochim. Acta, 11 (1975) 331.
J. W. Dodd and K. H. Tonge, Thermal Methods, John Wiley & Sons, London 1987, p. 145.
F. W. Wilburn, R. Melling and R. M. McIntosh, Anal. Chem., 41 (1969) 1275.
D. J. David, Anal. Chem., 36 (1964) 2162.
L. B. Rogers and E. M. Barral, Anal. Chem., 34 (1962) 1101.
L. Artus, Thermochim. Acta, 59 (1988) 133.
B. Predel and T. Neuman, Electrochem., 63 (1959) 988.
B. Kliburszky and Vogl-Földvári, Acta Geol., 5 (1958) 187.
Ozowaet al., Bull. Chem. Soc. Japan, 40 (1967) 1583.
E. Dosch, Thermochim. Acta, 1 (1970) 367.
S. L. Boersma, J. Amer. Ceram. Soc., 38 (1955) 281.
Egunovet al., Thermal Analysis Proc. 3rd ICTA, Davos (1971), Ed. H. G. Wiedmann, Birkhauser Verlog, Basel 1972, Vol. 1, p. 475.
M. Wittels, Am. Mineralogist, 36 (1951) 615.
Th. Heumann and B. Predel, Z. Metalkunde, 49 (1958) 90.
R. Caulcutt, Statistics in Research and Development, Chapmann and Hall, New York 1983, p. 66.
J. D. Gibbons, Nonparametric Statistical Inference, Mc Graw Hill, New York 1971, p. 198.
W. W. Wendlandt, Thermal methods of analysis, Interscience Publisher, New York 1964, p. 163.
E. M. Barral and L. B. Rogers, Anal. Chem., 34 (1962) 1101.
A. R. Carther, Am. Minerologist, 40 (1955).
V. P. J. Egunov and L. G. Berg, J. Thermal Anal., 2 (1970) 53.
P. D. Garn, Thermoanalytical methods of investigation, Academic Press, London 1965, p. 18.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Erdogan, B., Alpaut, O. A study on the heat transfer geometry in MBDTA. Journal of Thermal Analysis 39, 53–63 (1993). https://doi.org/10.1007/BF02235446
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02235446