Refractories

, Volume 35, Issue 10, pp 348–349 | Cite as

Control of the temperature of parts in the firing zones of tunnel furnaces

  • S. M. Serdyuk
Equipment, Mechanization, And Automation Of Production
  • 12 Downloads

Abstract

In cooperation with NTP Integral, NPO KIA has developed a device for continuous automatic control of the actual temperature of the surface of fired bricks. The temperature is measured within the interval 800 – 1400°C. The device is connected to a secondary device, an indication panel, and a computer. It excludes the effect of CO and CO2 and of the uneven density in the charge on the car on its indications.

Keywords

Furnace Automatic Control Actual Temperature Firing Zone Tunnel Furnace 

References

  1. 1.
    A. N. Gordov,Fundamentals of Pyrometry [in Russian], Metallurgizdat, Moscow (1964).Google Scholar
  2. 2.
    A. I. Demchenko and S. M. Serdyuk, “Prerequisites for creating a device for continuous control of the temperature of liquid metal by a contactless method,” in:Methods and Devices for Analysis of the Composition of a Substance.Trudy VNIIAP, Issue 2, Tekhnika, Kiev (1973), pp. 20–23.Google Scholar
  3. 3.
    G. Ribo,Optical Pyrometry [in Russian], Gostekhteorizdat, Moscow- Leningrad (1934).Google Scholar

Copyright information

© Plenum Publishing Corporation 1995

Authors and Affiliations

  • S. M. Serdyuk
    • 1
  1. 1.NPO KIAUkraine

Personalised recommendations