Abstract
Phosphate/chromate and accelerated chromate coatings were produced on commercially available aluminium. The Cr, P and Fe components of the conversion coatings were determined by radioactive tracer technique. The tracer technique was combined with ion-exchange and film-sectioning methods to determine the chromium (III)/total chromium ratio in the accelerated chromate coating. It was found that during the acidic dissolution of the conversion coating the chromium (III)/total chromium ratio may suffer changes. The filmforming components in the metal/bath interface are supersaturated and deposited onto the aluminium. The identified components of the accelerated chromate coatings are Cr/OH/3, Cr/OH/CrO4 and Cr4[Fe/CN/6]3 and the chromium (III)/total chromium ratio was found to be cca. 2/3.
Similar content being viewed by others
References
J. Nelson, I.R. Newhard,Metal Finishing, 70 /1972/ 49.
J. Nelson, I.R. Newhard,Metal Finishing, 70 /1972/ 66.
J.A. Treverton, Production and Use of Coil-Coated Strip, Metropole Hotel, Birmingham, 30. Sept.–12. Oct. 1980.
J.A. Treverton, N.C. Davies,Metals Tech., /1977/ 480.
M.F. Abd Rabbo, J.A. Richardson, G.C. Wood,Corros. Sci., 16 /1976/ 677.
M.F. Abd Rabbo, J.A. Richardson, G.C. Wood,Corros. Sci., 18 /1976/ 117.
H. Konno, S. Kobayashi, H. Takahashi, M. Nagayama,Corros. Sci., 22 /1982/ 913.
R.C. Furneaux, G.E. Thompson, G.C. Wood,Corros. Sci., 19 /1979/ 63.
E. Maleczki, T. Drozda,Izotóptechnika, 23 /1980/ 33.
W. Machu,Publ. Prot. Corrosion Metal Finishing, /1966/ 176.
W. Machu,Jahrbuch der Oberflächentechnik, 23 /1967/ 72.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Drozda, T., Maleczki, E. A radioanalytical study of the chromate conversion coating formed on aluminium. Journal of Radioanalytical and Nuclear Chemistry Letters 95, 339–349 (1985). https://doi.org/10.1007/BF02166272
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02166272