Sommario
Si studia il regime fluido nei cuscinetti idrostatici di spinta rotanti lubrificati con fluidi incompressibili in pressione, tenendo conto, oltre che degli effetti di inerzia sul lubrificante, anche del suo aumento di temperatura nel meato dovuto alle azioni di attrito fluido (regime termofluidodinamico).
Si ricavano dal sistema di equazioni differenziali di Navier-Stokes, di continuità e dell'energia, le equazioni differenziali od integro-differenziali atte a fornire i valori della temperatura, delle componenti della velocità e della pressione del fluido nel cuscinetto e, mediante essi, i valori della capacità di carico, della portata volumetrica di fluido e del momento d'attrito.
Summary
This paper studies the flow in rotating hydrostatic thrust bearings lubricated with incompressible fluids under pressure. It considers, besides the effects of inertia on the lubricant, its increase in temperature in the film due to fluid friction (thermohydrodynamic flow).
From the system of differential equations of Navier-Stokes, continuity and energy, we obtain differential or integro-differential equations that can furnish the values of the temperature and of the components of velocity and pressure of the fluid in the bearing. From these we obtain the values of the load-carrying capacity, of the volume flow rate of the fluid and those of the friction torque.
References
R. Bassani,Cuscinetti di spinta a facce piane a lubrificazione forzata, rotanti a piccola velocità, Ingegneria Meccanica, no. 12, 1966.
D. Dowson,Inertia effects of hydrostatic thrust bearings, ASME D, June 1961.
G. Bartolozzi,Sul regime fluidodinamico nei cuscinetti di spinta a facce piane lubrificati con fluidi incompressibili in pressione, Ingegneria Meccanica, no. 7, 1964.
R. Cueuca andS. Raynor,Thermal effects on a cylindrical hydrostatic bearing with central fluid supply, ASLE 7, 1964.
O. Pinkus andB. Sternlicht,Theory of hydrodynamic lubrication, McGraw-Hill, N. Y., 1961.
H. Schlichting,Boundary layer theory, McGraw-Hill, N. Y., 1960.
L. S. Soo,Laminar flow over an enclosed rotating disk, ASME, February, 1958.
S. Fuggle,Handbuch der Physik, Strömungsmechanik I (Serrin J.), Springer Verlag, 1959.
B. Finzi andM. Pastori,Calcolo tensoriale ed applicazioni, Zanichelli, 1949.
G. Vogelpohl,Betriebssichere Gleitlager, Springer Verlag, 1967.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bassani, R. The thermohydrodynamic flow equations for hydrostatic thrust bearings. Meccanica 5, 262–269 (1970). https://doi.org/10.1007/BF02145650
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02145650