Skip to main content
Log in

Bewegungsanalyse an verschiedenen industriellen Arbeitsplätzen

An analysis of bodymovement on different industrial work places

Analyse de mouvements à divers postes de travail industriels

  • Published:
Sozial- und Präventivmedizin/Social and Preventive Medicine

Zusammenfassung

Zur Erfassung der Bewegung am Arbeitsplatz wurde ein Messsystem auf Ultraschallbasis aufgebaut. Bewegungen an Kassen-, Mikroskop- und Lupenarbeitsplätzen wurden bereits mit diesem System gemessen. Die Analyse ergab verschiedene Befunde. Einerseits wurde beim Kassenarbeitsplatz eine Bewegungsdynamik gemessen, die die Verwendung eines grossen Greifraums (anatomisch maximaler Greifraum) in Frage stellt und für die Dimensionierung eines Kassenarbeitsplatzes einen «kleineren» Greifraum fordert. Andererseits wurde beim Mikroskop- und Lupenarbeitsplatz eine starre Haltung des Kopfes und der Schulter festgestellt, was auf hohe statische Belastung der Haltemuskulatur des Rückens und des Nackens schliessen lässt.

Summary

A measuring system based on ultrasound was developed to measure bodymovement. Movements of cash register operators, of microscope operators and of operators using a magnifying glass were measured. The analysis showed different results. On one hand the operator found it rather difficult to use his full length of his arm (maximum working aerea) to operate the cash register and a smaller working area was proposed. On the other hand a rigid posture of the head and the shoulder was found to be typical for operators working with microscopes and magnifying glasses. This puts a rather high static load upon the muscular system used to stabilise the back and the neck.

Résumé

Pour analyser les mouvements aux postes de travail, un système de mesure à base d'ultrason a été développé. Les mouvements des postes de travail à la caisse, au microscope et à la loupe ont déjà été évalués avec ce système. Diverses données en résultent. A la caisse une dynamique de mouvements a été mesurée qui met en cause l'espace maximum pour saisir et qui exige un espace plus restreint pour ces postes de travail. D'autre part une tenue rigide de la tÊte et des épaules a été constatée aux postes de travail au microscope et à la loupe, et nous pouvons conclure que la charge statique de la musculature du dos et de la nuque est trop élevée.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Literatur

  1. Hinnen U. und Witscht U.: Kassenarbeit und technologische Entwicklung. Forschungsbericht in Vorbereitung, 1987.

  2. Conrady P., Krueger H. und Zülch J.: Untersuchung der Belastung bei Lupen- und Mikroskoparbeiten. Forschungsbericht im Druck; Bundesanstalt für Arbeitsschutz, 1987.

  3. Fleischer A.G. undLange W.: Analysis of hand movements during the performance of positioning tasks. Ergonomics, 1983; 26: 555–564.

    Article  CAS  Google Scholar 

  4. Rohmert W.: Untersuchung über Muskelermüdung und Arbeitsgestaltung. Berlin-Köln-Frankfurt: Beuth-Vertrieb GmbH, 1962.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Guggenbühl, U., Krüger, H. Bewegungsanalyse an verschiedenen industriellen Arbeitsplätzen. Soz Präventivmed 32, 266–268 (1987). https://doi.org/10.1007/BF02133840

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02133840

Navigation