Abstract
The possibility of modified thermal analytical techniques is discussed with respect to the control and optimization of glass production.
Calorimetry and EGA-measurements are particularly interesting. A ‘reversed’ drop calorimeter is described for the determination of the energy expended in the heating of a glass batch into the original state of constitution.
A piece of special EGA-equipment with MS-gas detection allows the determination of vaporization of chemical reactive and toxic species such as halides, AS2O3, Na2O, PbO etc. evolved out of the glass batch during the thermal treatment.
A possibility of production control by means of vacuum gas release profiles of glass-specimens is demonstrated.
Zusammenfassung
Im Hinblick auf Steuerung und Optimierung der Glasherstellung wird die Möglichkeit von modifizierten thermoanalytischen Techniken diskutiert.
Besonders interessant sind Kalorimetrie und EGA-Messungen. Zur Bestimmung der Energie, die dafür benötigt wird, Glasgemenge thermisch in ihren ursprünglichen Beschaffenheitszustand zu überführen, wird ein “umgekehrtes≓ Tropfenkalorimeter vorgestellt.
Eine spezielle EGA-Apparatur mit MS-Gasdetektion ermöglicht die Bestimmung der Verdampfung chemisch reaktiver und toxischer Substanzen wie z.B. von Halogeniden, AS2O3, Na2O, PbO usw., die bei der Hitzebehandlung aus dem Glasgemenge austreten.
Es wird eine Möglichkeit zur Produktionssteuerung mit Hilfe der Gasprofile der in Vakuum freigesetzten Gase dargestellt.
Similar content being viewed by others
References
Proc. of the Toronto Symp. on Thermal Analysis, H. G. McAdie, editor, Chem. Inst. of Canada, Toronto 1965, 1967, 1969.
Glass: Science and Technology, D. R. Uhlmann, N. J. Kreidl, editors, Academic Press, New York (1984) Vol. 2.
F. W. Wilburn and C. V. Thomasson, J. Glass Techn. 42 (1958) 158.
A. Yamamoto, Proc. 1st ICTA, Aberdeen 1965, p. 274.
K. Heide, Dynamische Thermische Analysenmethoden, VEB Deutscher Verl. f. Grundstoffind. 1982.
W. F. Hemminger and G. Höhne, Grundlagen der Kalorimetrie, Verlag Chemie, Weinheim 1979.
K. Heide, G. Kluge, and R. Reisch, Proc. IBausSil Weimar (1982) Sekt. 4, 217.
K. Heide, J. Thermal Anal. 35 (1989) 305.
W. F. Hemminger and H. K. Cammenga, Methoden der Thermischen Analyse, Springer Verlag 1989.
D. Menz, K. Heide, Ch. Kunert, Ch. Mensing and L. Kolditz, Z. anorg. allg. Chem., 540/541 (1986) 191.
D. Menz, L. Kolditz, K. Heide, C. Schmidt, Ch. Kuhn, Ch. Mensing, H. G. v. Schnering and W. Hönle, Z. anorg. allg. Chem., 551 (1987) 231.
K. Heide, E. Härtung and H. G. Schmidt, Glastechn. Ber. 59 (1986) 59.
Th. Stelzner, K. Heide and K. Kothe, Glass Techn. 31 (1990) 236.
Th. Stelzner and K. Heide, Proc. 65th DGG-meeting, Bad Wiessee 1991 p. 79.
C. Kröger, Glastechn. Ber., 26 (1953) 202.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Heide, K. Production planning in glass manufacture by means of thermal analysis. Journal of Thermal Analysis 38, 27–36 (1992). https://doi.org/10.1007/BF02109106
Issue Date:
DOI: https://doi.org/10.1007/BF02109106