Abstract
An automated process planning system is developed for manufacturing prismatic parts on a Horizontal Machining Center. The goal is to demonstrate the feasibility of using the integer (0–1) programming technique to determine the optimal sequence of machining operations. The final process sequence reflects constraints on tool life. Precedence relationships due to fixturing and/or process requirements are also taken into account. Decision logic for selection of cutting tools and calculation of necessary machining parameters are also developed. Process plans for test workpieces are produced and the effectiveness of the system demonstrated.
Similar content being viewed by others
References
R. Weill, G. Spur and W. Eversheim, Survey of computer-aided process planning systems,CAD/CAM Integration and Innovation (Computer & Automated Systems Association of SME, 1985) First ed., pp. 185–196.
H.J. Steudel, Computer-aided process planning: past, present and future, International Journal Of Production Research, 22, No. 2 (1984) 253–266.
G. Spur, F.-L. Krause and H.-M. Anger, Systems for computer aided process planning including quality control, Advanced CREST Course on Computer Integrated Manufacturing (CIM83), Karlsruhe, W. Germany (September 1983) pp. 85–99.
T.C. Chang and R.A. Wysk, An Introduction to Automated Process Planning Systems (Prentice-Hall, Inc., 1985).
D.K. Allen and P.R. Smith, Computer aided process planning, Report, Computer Aided Manufacturing Laboratory, Brigham Young University, October 15, 1980.
R. Srinivasan and C.R. Liu, Evolutionary trends in generative process planning, Advanced CREST Course on Computer Integrated Manufacturing (CIM 83), Karlsruhe, W., Germany (September 1983) pp. 179–192.
R.A. Wysk, An automatic process planning and selection program, Ph.D. Thesis, Department of Industrial Engineering, Purdue University, May 1977.
R.O. Mittal, A process planning system based on integer programing for horizontal machining centers, M.S. Thesis, Department of Industrial and Systems Engineering, Ohio State University, Columbus, Ohio, August 1986.
IBM Mathematical Programming System Extended / 370; (MPSX / 370), Mixed Integer Programming / 370; (MIP / 370) Program Reference Manual (International Business Machines Corporation, November 1985) Second Edition.
A. Kusiak, Integer programming approach to process planning, International Journal of Advanced Manufacturing Technology, 1, No. 1 (1985) 73–83.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mittal, R.O., Lewis, R.L. A “micro” process planning system based on integer programming for prismatic parts produced on horizontal machining centers. Ann Oper Res 17, 271–290 (1989). https://doi.org/10.1007/BF02096609
Issue Date:
DOI: https://doi.org/10.1007/BF02096609