Abstract
During development of a Venetian Blind polarizer, high reflections and substantial pattern deformation were noted. Analysis showed that when the polarizer was illuminated slightly off axis, a degenerate mode was excited. This mode is resonant at the design center frequency, and was the cause of the problems. A design developed using dual vanes has been shown to be free of the problem. It also has greater bandwidth.
Similar content being viewed by others
References
Ridenour, L.N., “Radar Systems Engineering,” MIT Radiation Laboratory Series, Vol. 1, McGraw-Hill, 1947.
Fitzgerald, W.D., A 35-GHz Beam Waveguide System for the Millimeter-Wave Radar. The Lincoln Laboratory Journal, Volume 4, No 2, 1992.
Cloete, J.H., Interaction between a parallel plate polarizer and a linear slotted waveguide array., International Conference on Antennas and Propagation (ICAP 85), 4th, Proceedings (A86-31851 14-32). Institution of Electrical Engineers, 1985, pp 40–43.
Amitay, N., Galindo, V. Wu, C.P., Theory and Analysis of Phased Array Antennas, Wiley-Interscience, 1972. Chapters 2–3, pp 37–120.
Withington, J.R., Imbriale, W.A., Withington, P., The JPL Beam Waveguide Test Facility, 1991 Antennas and Propagation Society Symposium, Vol 2, pp 1194–1197, June 1991.
Rosenbrock, H.H., An automatic method for finding the greatest or least value of a function. Computer Journal, October 1960.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Conroy, B.L., Hoppe, D.J. & Imbriale, W.A. Broadband venetian blind polarizer with dual vanes. Int J Infrared Milli Waves 14, 987–996 (1993). https://doi.org/10.1007/BF02084574
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02084574