Hyperfine Interactions

, Volume 83, Issue 1, pp 271–274 | Cite as

Comparison of ball milling of Fe/Cr powders and Fe-Cr crystalline alloy

  • V. A. Peña Rodríguez
  • S. K. Xia
  • E. Baggio-Saitovitch
  • C. Larica
Non-Crystalline Materials

Abstract

Using the mechanical attrition technique (MA), we have prepared a Fe-Cr alloy starting with a mixture of elemental iron and chromium powders with a nominal composition of 28 at% of Fe and 72 at% of Cr. MA was also performed on solid solutions of Fe28Cr72 crystalline alloy. The Mössbauer effect of the mechanically alloyed powder from Cr and Fe metals has been compared with that from crystalline alloy.

Keywords

Iron Thin Film Chromium Solid Solution Milling 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    E. Hellstern and L. Schultz, Appl. Phys. Lett. 49 (1986) 1163.Google Scholar
  2. [2]
    V.A. Peña Rodríguez, E. Baggio-Saitovitch, S.K. Xia, C. Larica and J.C. de Lima, Hyp. Int. 69 (1991) 721.Google Scholar
  3. [3]
    S.K. Xia, E. Baggio-Saitovitch, F.C. Rizzo Assunção and V.A. Peña Rodríguez, J. Phys.: Condens. Matter 5 (1993) 2729.Google Scholar

Copyright information

© J.C. Baltzer AG, Science Publishers 1994

Authors and Affiliations

  • V. A. Peña Rodríguez
    • 2
    • 1
  • S. K. Xia
    • 1
  • E. Baggio-Saitovitch
    • 1
  • C. Larica
    • 3
    • 1
  1. 1.Centro Brasileiro de Pesquisas FísicasRio de Janeiro, RJBrazil
  2. 2.Facultad de Ciencias Físicas de la Universidad Nacional Mayor de San MarcosLimaPeru
  3. 3.Departamento de Física e Química de Universidade Federal do Espírito SantoVitoriaBrazil

Personalised recommendations