Abstract
Chemical and high energy beam conversion coatings, as well as PVD thin films, are characterised to correlate microstructures and mechanical properties. In particular, thermochemical boriding and laser surface melting are considered to produce conversion coatings on iron alloys, and physical vapour techniques to deposit thin films of titanium nitride on iron. The mechanisms leading to selected microstructures and, consequently, to improved surface and interface properties are discussed.
Similar content being viewed by others
References
T.S. Sudarshan, ed.,Surface Modification Technologies, An Engineer's Guide, (Dekker, New York, 1989).
R.F. Bunshah, ed.,Deposition Technologies for Films and Coatings. Developments and Applications (Noyes, Park Ridge, 1982).
M.G. Hocking, V. Vasantasree and P.S. Sidky, eds.,Metallic and Ceramic Coatings, Production, High Temperature Properties and Applications (Longman, London, 1989).
D. Satas, ed.Coating Technology Handbook (Dekker, New York, 1991).
R. Chatterjee-Fischer, in:Surface Modification Technologies. An Engineer's Guide, ed. T.S. Sudarshan (Dekker, New York, 1989) p. 567.
A.G. von Matuschka,Boronizing (Heyden, Philadelphia, 1981).
S. Mareels and W. Wettinck,Proc. 12th Int. Congress on Metal Finishing, Paris 1988 (p. 1093).
M. Carbucicchio, L. Bardani and G. Palombarini, J. Mater. Sci. 15 (1980) 711;
M. Carbucicchio, L. Bardani and G. Sambogna, J. Mater. Sci. 15 (1980) 1483.
M. Carbucicchio, G. Meazza and G. Sambogna,Proc. 3rd Int. Congr. on Heat Treatment of Materials (IFHT, Shanghai, 1983) p. 350.
M. Carbucicchio, G. Palombarini and L. Cento, in:Proc. 3rd Int. Congr. on Heat Treatment of Materials (IFHT, Shanghai, 1983) p. 344.
G. Palombarini and M. Carbucicchio, J. Mater. Sci. Lett. 3 (1984) 791; 4 (1985) 170;
M. Carbucicchio and G. Palombarini, J. Mater. Sci. Lett. 4 (1985) 483.
P. Goeuriot, R. Fillit, F. Thevenot, J.H. Driver and H. Bruyas, Mater. Sci. Eng. 5 (1982) 9.
M. Carbucicchio, G. Meazza and G. Palombarini, J. Mater. Sci. 12 (1982) 3123;
M. Carbucicchio, E. Zecchi, G. Palombarini and G. Sambogna, 18 (1983) 3355;
M. Carbucicchio, G. Palombarini and G. Sambogna, J. Mater. Sci. (1984) 4035;
G. Palombarini, M. Carbucicchio and L. Cento, J. Mater. Sci. 19 (1984) 3732.
C. Badini, C. Gianoglio and G. Pradelli, J. Mater. Sci. 21 (1986) 1721.
M. Carbucicchio and G. Palombarini, J. Mater. Sci. Lett. 3 (1984) 1046.
G. Palombarini, G. Sambogna and M. Carbucicchio,Proc. 5th Int. Congr. on Heat Treatment of Materials, Vol. III (IFHT, 1986) p. 1470.
G. Palombarini and M. Carbucicchio, J. Mater. Sci. Lett. 6 (1987) 415.
M. Carbucicchio and G. Palombarini, J. Mater. Sci. Lett. 6 (1987) 1147.
M. Carbucicchio, G. Palombarini and G. Sambogna, Hyp. Int. 41 (1988) 617.
M. Carbucicchio, G. Palombarini and G. Sambogna, Nucl. Instr. Meth. B 76 (1993) 303.
W.M. Steen, in:Applied Laser Tooling (Nijhoff, Dordrecht, 1987) p. 131.
P.A. Molian,Surface Modification Technologies, An Engineer's Guide, ed. T.S. Sudarshan (Dekker, New York, 1989) p. 421.
D.M. Follstaedt and S.T. Picraux,Proc. Surface Alloying by Ion, Electron and Laser Beams (ASM, Metals Park, 1987) p. 175.
S.A. David, J.M. Vitek and T.L. Hebble, Weld. Res. 66 (1987) 289-s.
Y. Nakao, K. Nishimoto and W.P. Zhang, Trans. Jpn. Weld. Soc. 19 (1988) 100.
C. Rieker, D.G. Morris and J. Steffen, Mater. Sci. Technol. 5 (1989) 590.
M. Carbucicchio, G. Meazza, G. Palombarini and G. Sambogna, J. Mater. Sci. 21 (1983) 1543.
M. Carbucicchio and G. Palombarini, Thin Solid Films 126 (1985) 293.
M. Carbucicchio and G. Palombarini, J. Mater. Sci. 21 (1986) 75.
M. Carbucicchio, G. Palombarini and G. Sambogna, Hyp. Int. 28 (1986) 1921;
M. Carbucicchio and G. Palombarini, Hyp. Int. 41 (1988) 621;
M. Carbucicchio, R. Reverberi, G. Palombarini and G. Sambogna, Hyp. Int. 46 (1989) 473.
M. Carbucicchio, A. Casagrande, G. Palombarini and G. Sambogna,Proc. Int. Conf. on Laser Materials Processing, Osaka (High Temperature Society of Japan, 1987) p. 431.
M. Carbucicchio, G. Lenzi, G. Palombarini and G. Sambogna, in:Gas Flow and Chemical Lasers, eds. S. Rosenwaks (Springer, Berlin, 1987) p. 436.
G. Palombarini, G. Sambogna and M. Carbucicchio, J. Mater. Sci. 26 (1991) 3396.
M. Carbucicchio, G. Palombarini and G. Sambogna, Hyp. Int. 57 (1990) 1775.
D.G. Bhat, in:Surface Modification Technologies. An Engineer's Guide, ed. T.S. Sudarshan (Dekker, New York, 1989) p. 141.
J.A. Thornton, in:Deposition Technologies for Films and Coatings, ed. R.F. Bunshah (Noyes, Park Ridge, 1982) p. 231.
U. Helmersson, B.O. Johansson, J.E. Sundgren, H.T.G. Hentzell and P.E. Billgren, J. Vac. Sci. Technol. A3 (1985) 2411;
J. Valli, U. Makela, A. Matthews and V. Murawa, J. Vac. Sci. Technol. 3 (1985) 308.
M. van Stappen, B. Malliet, L. De Schepper, L.M. Stals, J.P. Celis and J.R. Roos, Surf. Eng. 4 (1989) 305.
C.C. Cheng, A. Erdemir and G.R. Fenske, Surf. Coat. Technol. 39/40 (1989) 365.
D.S. Rickerby, S.J. Bull, T. Robertson and A. Hendry, Surf. Coat. Technol. 41 (1990) 63.
C. Quaeyhaegaens, L.M. Stals, M. Van Stappen and L. De Schepper, Thin Solid Films 197 (1991) 37.
M. Carbucicchio and G. Palombarini, Key Eng. Materials 48 (1990) 129.
M. Carbucicchio and G. Palombarini, Hyp. Int. 57 (1990) 1783.
M. Carbucicchio and G. Palombarini, Appl. Surf. Sci. 65/66 (1993) 331.
U. Gonser and M. Ron, in:Applications of Mössbauer Spectroscopy, ed. R.L. Cohen (Academic Press, New York, 1980) p. 281.
W. Lengauer, Acta Metall. Mater. 39 (1991) 2985.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Carbucicchio, M., Palombarini, G. Surface modifications for mechanical applications. Hyperfine Interact 83, 91–110 (1994). https://doi.org/10.1007/BF02074262
Issue Date:
DOI: https://doi.org/10.1007/BF02074262