Abstract
A numerical study of TM01-TE11 circular waveguide mode converter, with its optimized size and structure, is presented in this paper. Many factors such as spurious modes, backward wave, perturbation functions of waveguide axis or radius, phase-rematching techniques and ohmic losses are taken into account for the influence to mode converter's efficiency and bandwidth. And the dimensions of an optimized model (f0=35GHz. with input and output radius a0=13.6mm) are given.
Similar content being viewed by others
Reference
M. Thumm. 1984. High-power millimeter-wave mode converters in overmoded circular wave-guides using periodic wall perturbation.Int. J Electronics.57, 1225–1246.
M. Thumm. 1986. High power mode conversion for linearly polarized HE11 hybrid mode output.Int. J. Electronics. 61, 1135–1153.
M. Thumm. H. Kumric. and H. Stickel. 1987. TE03-TE01 mode converters for use with a 150 GHz gyrotron.International Journal of Infrared and Millimeter Waves.8, 227–240
H. Humric, M. Thumm, and R. Wilhelm. 1988. Optimization of mode converters for generating the fundamental TE01 mode from TE06 gyrotron output at 140 GHz.Int. J. Electronics. 64, 77–94.
Hongfu Li and M. Thumm 1991. Mode conversion due to curvature in corrugated waveguides.Int. J. Electronics. 71, 333–347
Hongfu Li and M. Thumm. 1991 Mode coupling in corrugated waveguides with varying wall impedance diameter change.Int. J. Electronics. 71, 827–844.
Shiwen Yang and Hongfu Li. 1993. A study on TM00-TM01 mode converters of circular waveguides.Journal of University of Science & Technology of China. Vol.22, supp., 118–124.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yang, S., Li, H. Numerical modelling of 8mm TM01-TE11 mode converter. Int J Infrared Milli Waves 16, 1935–1943 (1995). https://doi.org/10.1007/BF02072549
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02072549