Abstract
A new version of the automatic activation technique for the determination of fluorine, silicon and barium in fluorspar and barytes using an isotopic neutron source is presented. The main components of the automatic equipment consist of a sampling device and a “one-chamber” irradiation and measurement part with source transfer between the irradiation and the neutral position of source. The results of the measurements are proved to be best suited for the control of the flotation process under industrial conditions.
Similar content being viewed by others
References
E. MAUL, P. NHIEN, J. KOCH, Isotopenpraxis, 17 (1981) 33.
E. MAUL, D. WAGNER, R. GÖLDNER, J. Radioanal. Nucl. Chem., 122 (1988) 245.
R. GÖLDNER, E. MAUL, D. WAGNER, Zfl-Mitteilungen, 142 (1988).
R. A. M. RIZK, L. S. ASHMAWY, A. Z. HUSSEIN, Int. J. Radiat. Appl. Instr. Part E Nucl. Geophys., 3 (1989) No. 3, 217.
H. BRAUN, F. RIFFEL, J. Radioanal. Chem., 38 (1977) 125.
L. DE NORRE, J. OP DE BEECK, J. HOSTE, J. Radioanal. Chem., 59 (1980) 453.
N. HAMMAMI, Fluß- und Schwerspatwerke Pforzheim GmbH, private communication.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Göldner, R., Maul, E. & Wagner, D. An equipment for the on-line determination of the fluorine, silicon and barium content of fluorspar and baryte ores. Journal of Radioanalytical and Nuclear Chemistry, Articles 174, 35–42 (1993). https://doi.org/10.1007/BF02040330
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02040330