Résumé
On étudie dans cet article un procédé pour obtenir des polycarbonates de bisphénol-A de divers taux de cristallinité. On détermine la variation thermique du module-(10 sec) et la résistance au choc des ces polymères. On étudie également l'influence du recuit sur les propriétés mécaniques.
Summary
This paper describes a procedure to obtain polycarbonate of bisphenol A samples of various degrees of crystallinity. The modulus-temperature curves and the impact strength of these materials are investigated. The results show the importance of the annealing procedure on the mechanical properties of these systems.
References
Mercier, J. P., J. J. Aklonis, M. Litt andA. V. Tobolsky, J. Appl. Polymer Sci.9, 447 (1965).
Mercier, J. P., G. Groeninckx andM. Lesne, J. Polymer Sci. C16, 2059 (1967).
Christopher, W. P. andD. W. Fox, Polycarbonates (Reinhold, New York 1962).
A.S.T.M. Standards, Designation D 1043-61 et D 1053-58.
Idem, Designation D 256-56.
Conix, A. andL. Jeurissen, Advance in Chemistry Series, Plasticizers and Plasticization Processes Symposium, Philadelphia, April 1964.
Matsuoka, S., J. Polymer Sci.57, 569 (1962).
Peilstöcker, G., British Plastics1962, 365.
Illers, K. H. andH. Breuer, J. Colloid. Sci.18, 1 (1963).
Mercier, J. P. etG. Groeninckx, Rheol. Acta8, 510 (1969).
Gehman, S. D., D. E. Woodford andC. S. Wilkinson, jr., Ind. Eng. Chem.39, 1108 (1947).
Clash, R. F. andR. M. Berg, Ind. Eng. Chem.34, 1218 (1942).
Tobolsky, A. V. andM. Takahashi, J. Appl. Polymer Sci.7, 1341 (1963).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mercier, J.P., Groeninckx, G. & Goldblum, K.B. Étude du comportement viscoélastique du polycarbonate de bisphénol-A partiellement cristallisé. Rheol Acta 8, 504–510 (1969). https://doi.org/10.1007/BF01976236
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01976236