Abstract
The composition of the Peugeot automobile bumper was studied by using DSC. The effects on the DSC curve of quenching from the melt, heating rate, cooling rate, partial scanning, and partial scanning → isothermal scanning were studied. The experimental results indicate that the sample is a blend of two polymers and it is identified as a blend of PP and HDPE by Barta's additive thermal analytical method and IR spectroscopy. A set of methods to determine the composition of polymeric materials is created by using DSC.
Zusammenfassung
Mittels DSC wurde die Zusammensetzung von Peugeout KfzStoßstangen untersucht. Der Einfluß von Abschrecken aus der Schmelze, von Aufheizgeschwindigkeit, Kühlgeschwindigkeit, partiellem Scanning und partiellem Scanning → isothermem Scanning auf den Verlauf der DSC-Kurve wurde untersucht. Die experimentellen Daten ergaben ein Gemisch aus zwei Polymeren, das mit Hilfe des additiven thermischen Analysenverfahrens nach Barta und mittels IR-Spektroskopie als ein Gemisch aus PP und HDPE identifiziert werden konnte. Eine Reihe von Verfahren zur Bestimmung der Zusammensetzung polymerer Materialien unter Anwendung von DSC wurde ausgearbeitet.
Similar content being viewed by others
References
W. P. Brennan, Perkin- Elmer Thermal Analysis Literature TAAS-15, Sep. 1979.
J. Vargaet al., J. Thermal Anal. 17 (1979) 333.
J. P. Bellet al., J. Polym Sci., A-2 (6), (1968) 1773
Fu Shurenet al., Thermal Analysis, Proc. Seventh ICTA, Ed. by b. Miller, Vol.2, (1982) p 1063; Polymer Communications, No.2, (1983)
D. P. Pope and H. H. Wils, J. Polym. Sci. Phys. Ed., 14, (1976) 811.
G. E. Sweet and J. P. Bell, J. Polym. Sci., A-2 (10), (1972) 1273.
P. J. Lemstra, J. Polym. Sci., A-2 (10), (1972) 823.
R. C. Roberts. J. Polym. Sci., B, 8 (1970) 381.
R. Bartaet al., Thermal Analysis, Proc. Third ICTA, Ed. by Davos, (1971) pp. 389–393.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fu, S., Tan, Q. Investigation of identification of composition in polymeric materials by using DSC. Journal of Thermal Analysis 36, 503–512 (1990). https://doi.org/10.1007/BF01914504
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01914504