Abstract
Four CIBA epoxy composites. A, B, C and D, have been investigated with the aim of verifying the effects of the respective fibers upon polymerization rate.
For material A a comparison is made between prepreg and fiber-free resin; the remaining three have been directly compared with one another, the epoxy resin being the same for all of them. Although the phenomenological reaction order remains unchanged, always being equal to one, and although no significant difference may be observed for the kinetic constant, relevant effects have been observed for the trend of the polymerization degreevs. the time of cure.
A tentative interpretation, based upon the physico-chemical properties of the fibers, also seems suitable to explain the observed differences in the glass transition temperature.
Zusammenfassung
Vier CIBA-Epoxykomponenten A, B, C und D wurden mit dem Ziel untersucht, die Wirkungen der entsprechenden Fasern auf die Polymerisationsgeschwindigkeit festzustellen. Für Material A wurde ein Vergleich zwischen “prepreg” und faserfreiem Harz angestellt; die anderen drei wurden direkt miteinander verglichen. wobei stets das gleiche Epoxyharz verwendet wurde. Obwohl sich die phänomenologische Reaktionsordnung nicht ändert und immer gleich 1 ist, und obwohl für die kinetischen Konstanten keine signifikanten Unterschiede zu beobachten sind, wurden doch erhebliche Effekte hinsichtlich des Trends des Polymerisationsgrades in Abhängigkeit von der Zeit der Aushärtung gefunden. Eine auf den physikalisch-chemischen Eigenschaften der Fasern beruhende tentative Interpretation scheint auch zur Erklärung der beobachteten Unterschiede in den Glasübergangstemperaturen geeignet zu sein.
Резюме
Четыре эпокси композ итных материала (А, В, С и D) фирмы ЦИБА были иссле дованы с целью подтверждени я влияния соответств ующих волокон на скорость п олимеризации. Для материала А сравн ение было проведено м ежду безволокнистой и имп регнированной волокном смолами. Ост альные три материала были прямо сопоставлены друг с другом, поскольку эп окси смола для них был а одна и та же. Хотя фактически по рядок реакции оставался не изменно равным едини це и не наблюдалось значите льного различия в константах скорост и реакций, соответств ующие эффекты проявлялись на зависимости степени полимеризац ии от времени консерв ации. Предварительная инт ерпретация, основанн ая на физико-химических свойствах этих волок он, оказалась приемлемо й для объяснения наблюдаемых различи й в температурах стеклообразования.
Similar content being viewed by others
References
A. Schiraldi, V. Wagner, G. Samanni and P. Rossi, J. Thermal Anal., 21 (1981) 299.
A. Schiraldi and P. Rossi, Thermal Analysis, B. Miller Ed., J. Wiley & Sons, 1982, Vol. II, p. 1151.
A. Schiraldi and P. Baldini, J. Thermal Anal., in press.
W. A. Dark, E. C. Conrad and J. L. Crossman Jr., J. Chromat., 91 (1974) 247.
G. Samanni and C. Zanotti, 9th European Rotorcraft Forum, Sept. 13–15, 1983, Stresa, Italy.
A. Schiraldi and P. Baldini, Proc. NATAS Conference, Williamsburg, Sept. 1983, p. 588.
Author information
Authors and Affiliations
Additional information
This work was supported by the “Progetto Finalizzato per la Chimica Fine e Secondaria” of the Italian CNR.
Rights and permissions
About this article
Cite this article
Schiraldi, A., Baldini, P., Samanni, G. et al. DTA traces of epoxy resins and composites. Journal of Thermal Analysis 29, 645–653 (1984). https://doi.org/10.1007/BF01913521
Issue Date:
DOI: https://doi.org/10.1007/BF01913521