Abstract
An approximate procedure is proposed for the determination of the effective width of a heat flux penetrating into a heat sink of a stripe-geometry diode laser. The procedure markedly reduces the computer work-time necessary for calculations of temperature profiles within diode laser crystals.
Zusammenfassung
Es wird ein Näherungsverfahren zur Bestimmung der effektiven Stärke eines Wärmestromes gegeben, der in die Kühlkörper eines streifenförmigen Diodenlasers eindringt.Das Verfahren senkt erheblich die zur Berechnung der innerhalb der Diodenlaserkristalle auftretenden Temperaturprofile notwendige Rechnerzeit.
Similar content being viewed by others
References
W. Nakwaski, Opt. Quantum Electron, 15 (1983) 513.
W. Nakwaski, Optica Applicata, 13 (1983) 281.
R. A. Laff, L. D. Comerford, J. D. Crow, and M. J. Brady, Appl. Opt, 17 (1978) 778.
H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, Oxford University Press, (1959), p. 265.
W. B. Joyce and R. W. Dixon, J. Appl. Phys., 46 (1975) 855.
D. H. Newman, D. J. Bond, and J. Stefani, Solid-State & Electron Dev., 2 (1978) 41.
Author information
Authors and Affiliations
Additional information
This work was carried out within the Polish Central Program for Fundamental Research, CPBP 01.06, 6.04.
Rights and permissions
About this article
Cite this article
Nakwaski, W. Spreading thermal resistance of a diode-laser heat sink. Journal of Thermal Analysis 36, 109–114 (1990). https://doi.org/10.1007/BF01912073
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01912073