Abstract
A method is presented for calculating the efficiency of cooling of a flat surface with large ejection angles. The gaseous wall screen is calculated from formulas for tangential ejection.
Similar content being viewed by others
Literature cited
S. S. Kutateladze and A. I. Leont'ev, Heat and Mass Transfer and Friction in a Turbulent Boundary Layer [in Russian], Énergiya, Moscow (1972).
É. P. Volchkov, Gas Wall Screens [in Russian], Novosibirsk, Nauka (1983).
V. M. Repukhov, Theory of Thermal Protection of a Wall by Gas Injection [in Russian], Naukova Dumka, Kiev (1980).
R. A. Sawyer, “Two-dimensional reattaching jet flow including the effects of curvature on entrainment,” J. Fluid Mech.,17, 481–498 (1963).
C. Bourque and B. G. Newman, “Reattachment of a two-dimensional incompressible jet to an adjacent flat plate,” Aeronaut. Q.,11, 201–232 (1960).
B. G. Newman, “The prediction of turbulent jets and wall jets,” Can. Aeronaut. Space J., Oct., 288–305 (1969).
V. I. Korobko, Theory of Nonsimilar Jets of Viscous Fluid [in Russian], Saratov State Univ. (1977).
A. O. Ginevskii, Theory of Turbulent Jets and Wakes. Integral Methods of Calculation [in Russian], Mashinostroenie, Moscow (1969).
S. Z. Kopelev, Cooled Gas-Turbine Blades [in Russian], Nauka, Moscow (1983).
N. N. Kortikov, “Method of calculating boundary cooling on the basis of limiting laws of mixing of turbulent wall jets,” in: Structure of Turbulent Flows [in Russian], ITMO Akad. Nauk BSSR, Minsk (1982), pp. 56–63.
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 48, No. 5, pp. 715–719, May, 1985.
Rights and permissions
About this article
Cite this article
Kortikov, N.N., Smirnov, Y.A. Calculation of the effectiveness of plate cooling with coolant ejection at an angle to the main flow with allowance for the stagnant zone. Journal of Engineering Physics 48, 516–519 (1985). https://doi.org/10.1007/BF01840713
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01840713