Electrical Engineering

, Volume 79, Issue 1, pp 67–69 | Cite as

Determination of the bandwidth of pulse signals measuring transducers

  • K. Pacholski
Article

Contents

A method to determine the bandwidth of pulse signals transducers, depending on the crest factor of these signals, is described in this article. Estimated criteria for the frequency limit of the pulse signals were used to reach the goal.

Keywords

Signal Transducer Crest Pulse Signal Frequency Limit Estimate Criterion 

Bestimmung der Bandbreite von Meßwandlern für Impulssignale

Übersicht

Der Aufsatz beschreibt die Bestimmung der Bandbreite von Meßwandlern für Impulssignale in Abhängigkeit vom Scheitelfaktor. Dazu wird eine Methode für die Abschätzung der benötigten Grenzfrequenz angegeben.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Hagel, R.;Zakrzewski, J.: Miernictwo dynamicze. Warszawa, WNT, 1984Google Scholar
  2. 2.
    Krauss, M.;Woschni, E. G.: Messinformationssysteme. Berlin, VEB Verlag Technik, 1975Google Scholar
  3. 3.
    Pacholski, K.: The dynamic errors of mean-value transducers and the mothod their estimate. Zeszyty Naukowe Politechniki Łódzkeij Elektryka z. 71 (1981) 68–72Google Scholar
  4. 4.
    Pacholski, K.: The employment of a trapezoid signal for the accuracy assessment of voltage measuring transducers of an average, and rms value value. Zeszyty Naukowe Politechniki Łódzkiej Elektryka z. 84 (1993) 95–112Google Scholar
  5. 5.
    Pacholski, K.: Metrological models of voltage transducers with high-speed Overloading effect. Zeszyty Naukowe Politechniki Łódzkiej, Elektryka Nr 565 (1993)Google Scholar
  6. 6.
    Tranducer Interfacial Handbook, Analog Devices 1994Google Scholar

Copyright information

© Springer-Verlag 1996

Authors and Affiliations

  • K. Pacholski
    • 1
  1. 1.Institute of Principles of Electrical EngineeringTechnical University of ŁódżŁódżPoland

Personalised recommendations