References
A. G. EVANS,Scripta Metall. 10 (1976) 93.
W. POMPE, H. A. BAHR, G. GILLE and W. KREHER,J. Mater. Sci. 13 (1978) 2720.
E. HORNBOGEN,Acta Metall. 26 (1978) 147.
M. CLAVEL, D. FOURNIER and A. PINEAU,Met. Trans. 6A (1975) 2305.
J. LANKFORD and D. L. DAVIDSON,J. Eng. Mater. Tech. 98 (1976) 17.
S. SURESH,Eng. Fracture Mech. 21 (1985) 453.
T. D. DUDDERAR,Exp. Mech. 9 (1969) 281.
M. A. WILKINS and G. C. SMITH,Acta Metall. 18 (1970) 1035.
G. T. HAHN, R. G. HOAGLAND and A. R. ROSENFIELD,Met. Trans. 3 (1972) 1189.
C. BATHIAS and R. M. PELLOUX,ibid. 4 (1973) 1265.
W. J. BAXTER and S. R. ROUZE,ibid. 7A (1976) 647.
G. CHALANT and L. REMY,Mater. Sci. Eng. 50 (1981) 253.
J. S. CROMPTON and J. W. MARTIN,Metallography 17 (1984) 139.
D. R. WILLIAMS, D. L. DAVIDSON and J. LANKFORD,Exp. Mech. 20 (1980) 134.
Y. ILNO,ibid. 20 (1980) 316.
Y. BIROL,J. Mater. Sci. Lett. 6 (1987) 1161.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Birol, Y. Geometrical characterization of fatigue plastic zones in hot-rolled Fe-2.6%Si. J Mater Sci Lett 7, 539–541 (1988). https://doi.org/10.1007/BF01730720
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01730720