Advertisement

Journal of Materials Science Letters

, Volume 7, Issue 5, pp 509–510 | Cite as

Computer simulating solidification of ceramic injection moulding formulations

  • M. J. Edirisinghe
Article

Keywords

Polymer Injection Moulding Moulding Formulation Ceramic Injection Moulding 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    M. J. EDIRISINGHE and J. R. G. EVANS,J. High Tech. Ceram. 2 (1986) 1.Google Scholar
  2. 2.
    Idem, ibid. 2 (1986) 249.Google Scholar
  3. 3.
    “High Technology Ceramics”, Edited by P. Vincenzini (Elsevier, Amsterdam, 1987).Google Scholar
  4. 4.
    M. J. EDIRISINGHE and J. R. G. EVANS,Industrial Ceramics 7 (1987) 100.Google Scholar
  5. 5.
    Idem, J. Mater. Sci. 22 (1987) 2267.Google Scholar
  6. 6.
    P. S. ALLEN, M. J. BEVIS, M. J. EDIRISINGHE, J. R. G. EVANS and P. R. HORNSBY,J. Mater. Sci. Lett. 6 (1987) 165.Google Scholar
  7. 7.
    M. J. EDIRISINGHE and J. R. G. EVANS,Materials & Design VIII (1987) 284.Google Scholar
  8. 8.
    J. G. ZHANG, M. J. EDIRISINGHE and J. R. G. EVANS,Int. J. High. Tech. Ceram. in press.Google Scholar
  9. 9.
    J. P. HOLMAN, “Heat Transfer”, (McGraw-Hill, London, 1981) p. 118.Google Scholar
  10. 10.
    D. HANDS and F. HORSFALL,Rubb. Chem. Tech. 50 (1977) 253.Google Scholar
  11. 11.
    J. CRANK and P. NICOLSON,Proc. Camb. Phil. Soc. 43 (1947) 50.Google Scholar
  12. 12.
    G. E. MYERS, “Analytical Methods in Conduction Heat Transfer”, (McGraw-Hill, London, 1971) p. 283.Google Scholar
  13. 13.
    F. KRIETH and M. S. BOHN, “Principles of Heat Transfer”, (Harper and Row, New York, 1986) p. 165.Google Scholar
  14. 14.
    G. V. SAMSONOV, “High Temperature Materials No. 2”, (Plenum Press, New York, 1964) p. 127.Google Scholar
  15. 15.
    “Polymer Handbook”, Edited by J. Bandrup and E. H. Immergut, (Wiley, New York, 1975) V-60.Google Scholar
  16. 16.
    T. B. SHAFFER, “High Temperature Materials No. I”, (Plenum Press, New York, 1964) p. 285.Google Scholar
  17. 17.
    “Encyclopedia of Polymer Science and Technology”, Edited by H. F. Mark and N. G. Gaylord, (Wiley, New York, 1966) Vol. 5. p. 433.Google Scholar
  18. 18.
    T. H. FERRINGO, in “Handbook of Filler and Reinforcements for Plastics”, Edited by H. S. Katz and J. V. Milewski, (Van Nostrand Reinhold, New York, 1978) p. 44.Google Scholar
  19. 19.
    Z. HASHIN and S. SHTRIKMAN,J. Appl. Phys. 33 (1962) 3125.Google Scholar
  20. 20.
    D. K. HALE,J. Mater. Sci. 11 (1976) 2105.Google Scholar

Copyright information

© Chapman and Hall Ltd 1988

Authors and Affiliations

  • M. J. Edirisinghe
    • 1
  1. 1.Department of Materials TechnologyBrunel UniversityUxbridgeUK

Personalised recommendations