References
A. R. ROSENFIELD, E. VOTAVA and G. T. HAHN,Trans. ASM 61 (1968) 807.
X. J. ZHANG, PhD Thesis, University of Maryland (1985).
W. C. LESLIE,Iron Steel Soc. Trans. 2 (1983) 1.
J. H. TWEED and J. F. KNOTT,Metall Sci. 17 (1983) 45.
M. E. TAYLOR Jr and X. J. ZHANG, unpublished results.
R. K. NANSTAD, Oak Ridge National Laboratory (ORNL) letter 0709-45-85 (7/1985).
N. J. PETCH, “The Influence of Grain Boundary Carbide and Grain Size on the Cleavage Strength and Impact Transition Temperature of Steel”,Acta Metall. 34 (1986) in press.
G. R. IRWIN and A. A. WELLS,Metall. Rev. 10 (1965) 223.
American Society for Metals, “Metals Handbook”, 8th Edn, Vol. 9 (ASM, Metals Park, Ohio 1974) inside cover page.
T. A. HAHN and R. W. ARMSTRONG, in “Thermal Expansion 7”, edited by D. C. Lasen (Plenum, New York, 1982) pp. 195–206.
R. O. RITCHIE, J. F. KNOTT and J. R. RICE,J. Mech. Phys. Solids 21 (1973) 395.
S. P. RAWAL and J. GURLAND,Metall. Trans. 8A (1977) 691.
F. R. STONESIFER and W. H. CULLEN,ibid. 7A (1976) 1803.
R. W. ARMSTRONG, in “Advances in Research on the Strength and Fracture of Materials”, Vol. 4, edited by D. M. R. Taplin (Pergamon, London, 1978) pp. 61–75.
C. T. McMAHON and M. COHEN,Acta Metall. 13 (1965) 591.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhang, X.J., Armstrong, R.W. & Irwin, G.R. Cleavage fracturing stages at micrometre-size inclusions in pressure vessel steel weld metal. J Mater Sci Lett 5, 961–964 (1986). https://doi.org/10.1007/BF01730249
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01730249