References
W. A. LUDWICO,Polym. Plast. Technol. Engng 15 (1980) 83.
M. J. SALKIND and G. S. HOLISTER, “Applications of Composite Materials”, ASTM Special Technical Publication (1973) p. 524.
M. R. SULLIVAN and B. E. McINTOSH, “Advanced Composites, Consideration in Design of Large Space Antennas”, in Conference on Advanced Composites - Special Topics, December (1979) p. 370.
H. KELLERER and C. HERBERT, “Composites in Aerospace Industry: Current Applications and Future Developments”, Advances in Composite Materials, edited by G. Piatti (Applied Science, London, 1978) p. 319.
S. H. KATZ and J. V. MILEWSKI (eds), “Handbook of Fillers and Reinforcements for Plastics” (Van Nostrand-Reinhold, North Holland, 1978).
W. C. WAKE (ed.), “Filler for Plastics” (Ilifee, New York, 1971).
A. KELLY,Sci. Amer. 217(B (1967) 161.
G. PIATTI, “Advances in Composite Materials” (Applied Science, London, 1978) Ch. 2.
G. R. CLUSENER, “Economy Considerations for Pushrod-type Dilatometer”, AIP Conference Proceedings No 3 -Thermal Expansion (American Institute of Physics, New York, 1972) p. 51.
J. P. THOMAS, US Dept. Commerce Rept A.D. 287826.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mateen, A., Shamim, A. Thermal expansion of rigid polyurethane, reinforced by hammer-milled glass fibre. J Mater Sci Lett 8, 927–930 (1989). https://doi.org/10.1007/BF01729948
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01729948