References
J.-C. HUBERT, F. MOLLARD and B. LUX,Z. Metallkde 64 (1973) 835.
H. JONES, Proceedings 1st International Conference on Rapid Solidification Processing, Reston, Virginia, USA (Claitor, Baton Rouge, Louisiana, 1977) p. 28.
Idem, Proceedings 2nd International Conference on Rapid Solification Processing, Reston, Virginia, USA (Claitor, Baton Rouge, Louisiana, 1980) p. 306.
G. HAOUR, Proceedings of TMS-AIME Fall Meeting Symposium, Pittsburgh, Pennsylvania, 8 October, 1980 (Metallurgical Society of AIME, 1980) p. 117.
J. H. VINCENT, H. A. DAVIES and J. G. HERBERTSON,ibid., p. 103.
F. R. MOLLARD,ibid., p. 1.
H. JONES, “Rapid Solidification of Metals and Alloys” (Institution of Metallurgists, London, 1980).
L. KATGERMAN, F. J. KIEWITS, H. KLEINJAN and W. E. ZALM, Proceedings 4th International Yugoslave Symposium on Aluminium, Titograd, 21–23 April (1982).
H. JONES, Proceedings of Topics on Nucleation-Rapid Solidification, The Foundry Institute, Technical University of Aachen, FRG, 14–15 March (1983) p. 195.
W. HUG,ibid., p. 34.
N. A. EL-MAHALLAWY and M. A. TAHA,J. Mater. Sci. Lett. 4 (1985) 422.
M. F. ABDEL-GHAFFAR, MSc thesis, Ain-Shams University, Cairo (1985).
G. ABDEL-MALAK GURGIS, MSc thesis, The American University in Cairo (1974).
Metals Handbook, (ASM, 1948).
N. EL-MAHALLAWY, P. N. HANSEN and P. R. SAHM, “Numerical Computation of Cooling Curves for Alloys with mushy zones”, in Proceedings of International Conference on Numerical methods for Transient and Coupled Problems, Venice, Italy, 9–13 July (1984) pp. 100–11.
H. FREDRIKSSON and H. SÖDERHJELM, “The Transition from Crystalline to Amorphous State in the Melt Spinning”, MRS-Europe Symposium (1984) pp. 51–8.
H. FREDRIKSSON, A. OSTLUND and H. SÖDERHJELM, “A Theoretical Study of the Transition from Crystalline to Amorphous Structure in Alloys produced by the Melt Spinning”. Proceedings of Conference on Rapid Quenching of Metals RQS, Wurzburg 3–7 September (1984).
L. KATGERMANN and P. J. VAN-DEN BRICK, “A Mathematical Model for Melt Spinning of Crystalline Alloys”, Proceedings 4th International Conference on Rapidly Quenched Metals, Sendai, Japan (1981) pp. 61–4.
H. H. LIEBERMANN,J. Crystal Growth 70 (1984) 497.
J. H. VINCENT, H. A. DAVIES, J. G. HERBERTSON, A Study of the Melt Spinning Process, in “Continuous Casting of Small Cross Sections”, edited by Y. V. Murty and F. R. Mollard (Met. Soc. AIME, 1981) pp. 103–16.
N. EL-MAHALLAWY, M. A. TAHA, M. ABELREIHIM and W. REIF,Metall 40 (1) (1986) 49.
N. EL-MAHALLAWY, M. F. ABDIN and M. A. TAHA, Application of Computer Simulation to Correlate Structures with Solidification Parameters, in “Current Advances in Mechanical Design and Production”, 3rd Cairo University MDP Conference, Cairo, 28–30 December 1985 (Pergamon, 1985) pp. 433–440.
K. MIYAZAWA, personal communication.
E. NIYAMA, personal communication.
D. G. MORRIS,Metal Sci. 16 (1982) 457.
T. W. CLYNE, “Numerical Modelling of Rapid Solidification” Topics on Nucleation — Rapid Solidification held at the Foundry Institute, the Technical University of Aachen, FRG, 14/15 March (1983) pp. 96–130.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
El-Mahallawy, N.A., Taha, M.A. Melt spinning of Al-Cu alloys: Modelling of heat transfer. J Mater Sci Lett 6, 885–889 (1987). https://doi.org/10.1007/BF01729858
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01729858