References
D. L. DYKE and H. D. AMBS, in “Powder Metallurgy Applications, Advantages and Limitations”, edited by Erhard Klar (ASM, Ohio, 1983) p. 123.
R. L. SAND, L. A. PHELPS and W. L. MORGAN,Powder Metall. 10 (1966) 158.
B. N. SINGH,J. Iron Steel Inst. 4 (1971) 306.
A. STOSUY and R. R. HOLMES,Met. Prog. 91 (May) (1967) 81.
A. STOSUY, in “Technical Bulletin” (Hoeganaes Corporation, Diverton, N.J., 1969) p. 13.
R. A. ALLEN, “Strengthening of Fe-Cr-Al-Y Oxidation Resistant Alloys”, General Electric Final Report, Naval Air Systems Command Contract N00019-69-C-0149 (January 1970) (cited in “Dispersion Strengthening of Metals”, F. R. Morrel, Metals and Ceramic Information Centre, Columbus, 1977).
Idem, “Strengthening of Fe-Cr-Al-Y oxidation Resistant Alloys”, General Electric Final Report, Naval Air Systems Command Contract N00019-70-C-0232 (January 1971) (cited as in [6]).
R. A. ALLEN and R. J. PERKINS, “Strengthening of Fe-Cr-Al-Y Oxidation Resistant Alloys”, General Electric Final Report, Naval Air Systems Command Contract N00019-71-C-0100 (April 1972) (cited as in [6]).
P. G. BAILEY and H. J. BAUER,“ Strengthening of Fe-Cr-Al-Y Oxidation Resistant Alloys”, General Electric Company Quarterly Report No. 3, Naval Air System Command Contract N62269-73-C-0575 (November 1974).
G. ARTHUR,J Inst. Metals 83 (1954–55) 329.
C. J. SMITHELLS (ed.), “Metals Reference Book”, Vol. III (Butterworths, London, 1967) p. 696.
M. YOSHIMURAet al. J. Am. Ceram. Soc. 65 (1982) C166.
S. K. MUKHERJEE and G. S. UPADHYAY,J. Powder Bulk Solids Technol. 7 (1) (1983) 27.
Idem, Int. J. P/M and P/T 19 (1983) 289.
Idem, in “Sintered Metal Ceramic Composites”, edited by G. S. Upadhyaya (Elsevier, Amsterdam, 1984) p. 41.
F. V. LENEL, “Powder Metallurgy Principles and Applications” (MPIF, Princeton, New Jersey, 1980).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lal, S., Upadhyaya, G.S. Effect of Y2O3 addition and sintering period on the properties of P/M 316L austenitic stainless steel. J Mater Sci Lett 6, 761–764 (1987). https://doi.org/10.1007/BF01729006
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01729006