Skip to main content
Log in

Indices characterizing schemes of using cooling ponds

  • Experience in Operating Hydro Developments
  • Published:
Hydrotechnical Construction Aims and scope

Conclusions

  1. 1.

    The given explanations of the indices characterizing the use scheme of cooling ponds reflect their physical significance and make it possible to overcome alternative versions occurring in the literature on this matter.

  2. 2.

    The indices characterizing the use scheme are not constants but vary mainly as a function of the heat-exchange parameter and dilution factor of the stream of the circulating discharge.

  3. 3.

    The values of the indices of the use scheme according to the data of measurements in the prototype differ from those established from the results of laboratory experiments, mainly due to a difference in the dilution factors and different values of the heat-exchange parameter caused by distortion of the model scale and boosting the discharge and temperature of the water at the inlet.

  4. 4.

    The published values of the indices of the use scheme can be used only for those conditions under which they were established. When extending these values to other conditions, it is necessary to be guided by the dependences given above in the article with consideration of the character of the change in the dilution factor of the stream of the circulating discharge.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

Literature cited

  1. I. I. Makarov, “Analysis of coefficients characterizing engineering schemes of using cooling ponds,” Izv. VNIIG im. B. E. Vedeneeva, Leningrad,143, (1980).

    Google Scholar 

  2. Technical Instructions on Calculating Cooling Ponds [in Russian], Gosénergoizdat, Leningrad (1963).

  3. B. S. Farforovskii and V. B. Farforovskii, Cooling Ponds of Circulating Water of Thermal Power Stations [in Russian], Énergiya, Moscow (1972).

    Google Scholar 

  4. P. A. Denisov, “Analysis of the shortcomings of specifications on calculating cooling ponds,” Tr. Teploélektroproekta, No. 10 (1971).

  5. A. G. Averkiev, I. A. Kagan, and V. A. Kyakk, Calculation of the Hydrothermal Regime of Cooling Ponds [in Russian], Énergiya, Moscow (1975).

    Google Scholar 

  6. Methodological Recommendations on Calculating Cooling Ponds of Thermal Power Stations II 33-75 [in Russian], VNIIG, Leningrad (1976).

  7. I. I. Makarov, A. S. Sokolov, and S. G. Shul'man, Modeling Hydrothermal Processes of Cooling Ponds of Thermal and Nuclear Power Stations [in Russian], Énergoatomizdat, Moscow (1986).

    Google Scholar 

  8. Methodological Instructions. Methods of Calculating Maximum Allowable Thermal Discharges into Cooling Ponds [in Russian], Goskomgidromet, Moscow RD-52.26-61-88 (1988).

  9. N. L. Iosse, O. V. Kikish, and É. I. Yakovenko, “Results of on-site tests of cooling ponds,” Élek. Stan., No. 11 (1987).

  10. I. A. Sherenkov, “Some results of comparing model and prototype investigations of the cooling pond of the Starobeshevsk regional power station,” in: Transactions of the Joint Conferences on Hydraulic Engineering [in Russian], (1967).

  11. A. P. Braslavskii and M. N. Kumarina, “Thermal calculation of cooling ponds,” Tr. KazNIGMI, No. 68 (1968).

  12. M. N. Kumarina, M. E. Smirnova, T. G. Kokaliya, T. F. Popova, and V. P. Ivanov, “Evaluation of the natural state of water bodies and those heated by discharge of thermal and nuclear power stations in the USSR by the mapping method,” in: Transactions of the Joint Conferences on Hydraulic Engineering [in Russian], No. 115 (1977).

  13. V. A. Kyakk, “Cooling capacity of cooling ponds of thermal and nuclear power stations,” Izv. VNIIG,174, (1984).

  14. V. A. Kyakk, L. E. Lartsina, and S. M. Zmeikov, “Evaluation and calculation of the hydrothermal regime of the cooling ponds of the Stavropol regional power stations with the use of data of on-site investigations,” Izv. VNIIG,153, (1984).

  15. M. N. Kumarina, “Estimation of the calculated water temperature from data of various types of water bodies,” in: Transactions of the Joint Conferences on Hydraulic Engineering [in Russian], Énergiya, No. 107 (1976).

Download references

Authors

Additional information

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 10, pp. 55–59, October, 1991.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kyakk, V.A. Indices characterizing schemes of using cooling ponds. Hydrotechnical Construction 25, 661–667 (1991). https://doi.org/10.1007/BF01665655

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01665655

Keywords

Navigation