Abstract
Breakdown conditions for creation of the hollow cathode discharge in the nozzle passed through the rf powered electrode and creation of the plasma jet channel in PCVD reactor are studied. Pure nitrogen is used for measurements. The creation of jet channel is easier for smaller rf electrodes. The breakdown depends on the pressure and on the gas inflow rate. The plasma potential and the self-bias potential is influenced by the covering of reactor walls and the rf electrode by a dielectric layer.
Similar content being viewed by others
References
Hollahan J. R., Bell A. T.: Techniques and Applications of Plasma Chemistry. Wiley Interscience Publ., New York, 1974.
Coburn J. W., Köhler K.:in Electrochem. Soc. Fall Meet., San Diego (California, USA), October 1986. Ext. Abstr. Vol. 86-2 (1986) Abstr. 276, p. 414.
Hamasaki T., Ueda M., Chayahara A., Hirose M., Osaka Y.: Appl. Phys. Lett.44 (1984) 600.
Sugano T.: Applications of Plasma Processes to VLSI Technology. Wiley Interscience Publ., New York, 1985.
Bárdoš L., Dušek V., Lebedev Yu. A.:in Proc. 14th Czechosl. Sem. Plasma Phys. Techn., Liblice (Czechoslovakia), March 1987; Res. Rept. IPPCZ 227/I., Inst. Plasma Phys., Czechosl. Acad. Sci., Prague, 1987, p. 114.
Bárdoš L., Dušek V.: Thin Solid Films159 (1988) 265.
Bárdoš L., Dušek V., VanĚček M.: J. Non-Crystal. Solids97/98 (1987) 281.
Chapman B.: Glow Discharge Processes. Wiley Interscience Publ., New York, 1980.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bárdoš, L., Vu, N.Q. RF generation of the plasma jet channel for the jet PCVD. Czech J Phys 39, 731–738 (1989). https://doi.org/10.1007/BF01598451
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01598451