Conclusions
-
1.
The real deformation of elastic chambers of the thrust bearing on a hydraulic support under a load is plane-inclined in certain cases.
-
2.
Adjustment of the load on the bearing segments with installation of one indicator on the chamber does not always provide the necessary accuracy.
-
3.
It is advisable to adjust the bearing according to the method presented with the installation of two indicators on the chamber, which provides the necessary accuracy of distributing the load between segments.
Similar content being viewed by others
References
A. E. Aleksandrov, Thrust Bearings of Turbine-Generator Units [in Russian], Énergiya, Moscow (1975).
Additional information
Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 5, pp. 30–32, May, 1995.
Rights and permissions
About this article
Cite this article
Zakharov, A.A. Adjustment of the loads between segments in the hydraulic thrust bearing of a turbine-generator unit. Hydrotechnical Construction 29, 301–304 (1995). https://doi.org/10.1007/BF01577472
Issue Date:
DOI: https://doi.org/10.1007/BF01577472