Übersicht
Aus den Verlusten und der Geometrie werden der Temperaturverlauf im Zahn, der Stromdichteverlauf durch die Nutwand und die Wicklungserwärmung gegenüber dem als Isotherme betrachteten Nutgrundkreis berechnet. Damit können die thermischen Folgen jeder Änderung im Bereich Ständerzahn-Ständernut vorausbestimmt werden. Dies wird am Beispiel der Nutformoptimierung bei konstanter Nutfläche gezeigt.
Contents
The trace of temperature along the tooth, the current density trace through the wall of slots and the temperature rise of the windings in view of the basic circle of teeth considered as an isothermal line are calculated upon the losses and the physical dimensions. This enables the thermal consequences of any modification of the stator core dimensions to be forecast, as shown by means of the following example of a slot shape optimum with fixed area.
Similar content being viewed by others
Literatur
Hofmann, H. I.: Eine oberflächengekühlte Drehstrom-Motorenreihe mit verbesserter innerer Wärmeleitung. Diss. TH Braunschweig 1968
Keve, Th.: Anwendung des Digitalrechners und Methoden zur Bestimmung der Parameter für die Erwärmungsrechnung der Asynchronmotoren mit Oberflächenkühlung. Conti Elektro-Berichte 13 (1967) S. 42–49
Falk, K.: Erwärmung von Motoren—Berechnung der Erwärmung kleiner oberflächengekühlter Käfigläufermotoren. ETZ-B 23 (1971) H. 4, S. 74–76
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Falk, K. Wärmeströmung in Nut und Zahn oberflächengekühlter elektrischer Maschinen. Archiv f. Elektrotechnik 57, 307–311 (1976). https://doi.org/10.1007/BF01575744
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01575744