Skip to main content
Log in

Surface charge accumulation and decay on a spacer stressed with DC voltages at atmospheric conditions

Sättigungskonzentration und Abklingverhalten der Oberflächenladung an einem mit Gleichspannung beanspruchten Abstandshalter unter atmosphärischen Bedingungen

  • Published:
Archiv für Elektrotechnik Aims and scope Submit manuscript

Contents

Surface charge accumulation and its decay at a GIS spacer are studied at atmospheric conditions employing a two step-calibration method. The results show that the accumulation saturates within 30 minutes; the dominant mechanism of surface charge accumulation is the drift of charged particles via air, while that of the decay is surface conduction. The characteristics are similar at both polarities.

Übersicht

Die Konzentration und das Abklingen von Oberflächenladungen an einem GIS Abstandshalter wurden unter atmosphärischen Bedingungen mit Hilfe eines zweistufigen Kalibrierungsverfahrens untersucht. Die Ergebnisse zeigen eine Sättigung der Ladungskonzentration innerhalb von 30 Minuten. Als Hauptursache der Ladungskonzentration ist die Drift geladener Teilchen in Luft anzusehen, während das Abklingen auf die Oberflächenleitung zurückzuführen ist. Ähnliche Charakteristiken ergeben sich mit beiden Polaritäten.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Fujinami, H.; Takuma, T.; Yashima, M.; Kawamoto, T.: Mechanism and effect of DC charge accumulation onSF 6 gas insulated spacer. IEEE Trans. Power Delivery 4 (1989) 1765–1772

    Google Scholar 

  2. Cornick, K. J.; Abdul-Hussain, M. A.; Camarena, F. A.: Correlation between prebreakdown current pulse, surface charge densities and flashover voltage in gas/solid insulation systems. Proc. of Int. Conf. on Properties and Applications of Diele. Materials, Vol. 1, Xi'an, China (1985) 335–339.

  3. Nakanishi, K.; Yoshioka, A.; Arahata, Y.; Shibuya, Y.: Surface chase on epoxy spacer at DC stress in compressedSF 6 gas. IEEE Trans. Power Apparatus & Systems 102 (1983) 3919–3927

    Google Scholar 

  4. Ootera, H.; Nakannishi, K.; Shibuya, Y.; Arahata, Y.; Nitta, T.: Measurement of charge accumulation on conical spacer for 500 kV DC GIS. Gaseous Dielectrics IV. New York: Pergamon (1984) 443–451

    Google Scholar 

  5. Connolly, P.; Farish, O.: Surface charge measurement in air andSF 6. Gaseous Dielectrics IV. New York: Pergamon (1984) 405–413

    Google Scholar 

  6. Bektas, S. I.; Somerville, I. C.; Farish, O.; Chalmers, I. D.: Measurement of the temporal decay of charges on insulator surface. Gaseous Dielectrics V. New York: Pergamon (1986) 553–559

    Google Scholar 

  7. Yashima, M.; Fujinami, H.; Takuma, T.: Measurement of accumulate dcharge on dielectric surfaces with an electrostatic probe. Gaseous Dielectrics, V. New York: Pergamon (1986) 242–248

    Google Scholar 

  8. Matveeva, I. A.; Pronin, V. P.; Shekhtmen, L. A.: Measurement of surface charge by electrostatic induction. Sov. Phys. Tech. Phys. 22 (1977) 798–801

    Google Scholar 

  9. Sato, S.; Zaengl, W. S.; Knecht, A.: A numerical analysis of accumulated surface charge on DC epoxy resin spacer. IEEE Trans. Electrical Insulation 22 (1987) 333 to 340.

    Google Scholar 

  10. Jing, T.; Morshuis, P. H. F.; Kreuger, F. H.: The calibration of a capacitive probe for surface charge measurement. Arch. Elektrotech. 73 (1990) 337–341

    Google Scholar 

  11. Nakanishi, K.; Yoshioka, A.; Shibuya, Y.; Nitta, T.: Charge accumulation on spacer surface at DC stress in compressedSF 6 gas. Gaseous Dielectrics III. New York: Pergamon (1982) 365–373

    Google Scholar 

  12. Takano, T.: Characteristics of surface charge accumulation on a spacer inSF 6. 5th Int. Sym. on H. V. Eng., Braunschweig (1987), 15.08

  13. Sudhakar, C. E.; Srivastava, K. D.: Surface charge accumulation on spacers inSF 6 insulated systems under switching impulses. Conf. Record 1986 IEEE Int. Sym. Electrical Insulation, Washington DC (1986) 221–224

  14. Knecht, A.: Development of surface charges on epoxy resin spacers stressed with direct applied voltage. Gaseous Dielectrics III. New York: Pergamon (1982) 356 to 364

    Google Scholar 

  15. Gaertner, T. J. M.; Stoop, Th.; Tom, J.; Verhaart, H. F. A.; Verhage, A. J. L.: Decay of surface charges on insulators inSF 6 Conf. Record 1984 IEEE Int. Sym. Electrical Insulation, Montreal (1984) 208–213

  16. Ootera, H.; Nakanish, K.: Analytical method for evaluating surface charge distribution on a dielectric from capacitive probe measurement — application to a cone-type spacer in +500 kV DC GIS. IEEE Trans. Power Delivery 3 (1988) 165–172

    Google Scholar 

  17. Büsch, W.: Air humidity: an important factor for UHV design. IEEE Trans. Power Apparatus & Systems 97 (1978) 2086–2093

    Google Scholar 

  18. Jing, T.; Ma, N.: The influences of humidity and air pressure on the impulse flashover voltage on surface. Proc. 5th Int. Sym. H. V. Eng., Brauschweig (1987) 14.04

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jing, T., Moshuis, P.H.F. & Kreuger, F.H. Surface charge accumulation and decay on a spacer stressed with DC voltages at atmospheric conditions. Archiv f. Elektrotechnik 74, 315–319 (1991). https://doi.org/10.1007/BF01573907

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01573907

Keywords

Navigation