Contents
The analytical calculation of flux distribution within the compole iron of a compensated d.c. machine is obtained on the basis of the solution of the pole gap's potential problem. After the definition of the magnetic boundary value problem, vector potentials for the compole are set up which have to satisfy boundary conditions on its surface. Thus, initially unknown constants of compole potentials can be expressed by known quantities of pole-gap dimensions. Finally, all theoretical results are taken into account for the practical field calculation of a rolling-mill motor for which different operational modes are discussed.
Übersicht
Die analytische Berechnung der Flußverteilung im Wendepoleisen einer kompensierten Gleichstrommaschine gelingt, nachdem das Potentialproblem der Pollücke gelöst wurde. Nach der Definition des magnetischen Randwertproblems werden Vektorpotentiale für den Wendepol aufgestellt mit denen Randbedingungen auf dessen Oberfläche erfüllt werden. Damit können die anfänglich unbekannten Konstanten der Wendepolpotentiale als bekannte Größen der Pollückenabmessungen ausgedrückt werden. Schließlich werden alle theoretischen Ergebnisse zur praktischen Feldberechnung eines Walzwerk-Motors eingesetzt, für den verschiedene Betriebsfälle diskutiert werden.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Dedicated to the Memory of Prof. Dr.-Ing. habil. L. Hannakam
Rights and permissions
About this article
Cite this article
Neubauer, R.E. Contribution to the analytical field calculation within the compole iron of a compensated d.c. machine. Archiv f. Elektrotechnik 74, 261–265 (1991). https://doi.org/10.1007/BF01573901
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01573901