Summary
Sintered glass bead cores were plugged until the permeability was reduced to 1% or less of the original permeability by the injection of a slime-producing bacterium isolated from produced water. Scanning electron microscopy of fractured core sections showed that the bacteria were predominantly located in the uppermost sections, around the core inlet. Killing the bacterial cells in the plugging biofilm, using a biocide, had little effect on core permeability. The dead cells were only removed when backflow pressure, simulated by inversion of the test core followed by fluid injection, was applied and maintained at 55–69 kPa. Backflow of plugged cores containing live bacteria produced transient pressure-dependent increases in permeability that were proportional to the backflow pressure applied. We conclude that only sustained backflow procedures reduced permeability: such operations are not effective for oil recovery in field conditions.
Similar content being viewed by others
References
Characklis, W.G., J.D. Bryers, M.G. Trulear and N. Zelver. 1979. Biofouling film development and its effects on energy losses. A laboratory study. Condensor Biofouling Control Symposium, 25–29 March 1979. Electric Power Research Institute, Atlanta, GA.
Clementz, D.M., D.E. Patterson, R.J. Aseltine and R.E. Young. 1982. Stimulation of water injection wells in the Los Angeles basin by using sodium hypochloride and mineral acids. J. Pet. Technol. 34: 2087–2096.
Costerton, J.W. 1984. The formation of biocide-resistant biofilms in industrial, natural and medical systems. Dev. Ind. Microbiol. 25: 363–371.
Costerton, J.W., R.T. Irvin and K.-J. Cheng. 1981. The bacterial glycocalyx in nature and disease. Annu. Rev. Microbiol. 35: 299–324.
Fletcher, M. and G.D. Floodgate. 1973. An electron-microscopic demonstration of an acidic polysaccharide involved in the adhesion of a marine bacterium to solid surfaces. J. Gen. Microbiol. 74: 325–334.
Jang, L.-K., P.W. Chang, J.E. Findley and T.F. Yen. 1983. Selection of bacteria with favorable transport properties through porous rock for the application of microbial-enhanced oil recovery. Appl. Environ. Microbiol. 46: 1066–1072.
Kalish, P.J., J.A. Stewart, J.A. Rogers and E.O. Bennett. 1964. The effect of bacteria on sandstone permeability. J. Pet. Technol. 16: 805–814.
Myers, G.E. and W.D. Samiroden. 1967. Bacterial penetration in petroliferous rock. Prod. Mon. 31: 22–25.
Myers, G.E. and B.M. Sladyj. 1962. The microbiological qualility of injection water used in Alberta oilfields. Prod. Mon. 26: 12–14.
Raiders, R.A., M.J. MeInerney, D.E. Revus, H.M. Torbati, R.M. Knapp and G.E. Jenneman. 1986. Selectivity and depth of microbial plugging in Berea sandstone cores. J. Ind. Microbiol. 1: 195–203.
Read, R. 1983. Ph.D. Thesis, University of Calgray, Calgary, Canada.
Ruseska, I., J. Robbins, J.W. Costerton and E.S. Lashen. 1985. Biocide testing against corrosion-causing oilfied bacteria helps control plugging. Oil. Gas J.: 253–264.
Shaw, J.C., B. Bramhill, N.C. Wardlaw and J.W. Costeron. 1985. Bacterial fouling in a model core systems. Appl. Environ. Microbiol. 49: 693–701.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cusack, F., Lappin-Scott, H.M. & Costerton, J.W. Effects of biocide treatment and backflow pressure on the permeability of microbially fouled model cores. Journal of Industrial Microbiology 2, 329–335 (1988). https://doi.org/10.1007/BF01569571
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01569571