Literature Cited
Ya. B. Fridman, The Mechanical Properties of Metals. Mechanical Tests. Structural Strength [in Russian], 3rd revised and enlarged edition. In two parts. Part 2, Mashinostroenie, Moscow (1974).
F. S. Savitskii and B. A. Vandyshev, “The rigidity of testing machines and its effect on the descending part of the stress-strain and bending diagram,” Zavod. Lab.,22, No. 6, 717–721 (1956).
T. K. Zilova, N. I. Novosil'tseva, and Ya. B. Fridman, “Test methods with variable margin of elastic energy and its effect on the mechanical properties (review),” Zavod. Lab.,35, No. 10, 1229–1236 (1969).
G. Z. Lomaev, “The effect of the rigidity of universal testing machines on the strain rate of metal specimens,” Zavod. Lab.,31, No. 9, 1130–1133 (1965).
A. A. Lebedev and N. G. Chausov, “Installation for testing materials and plotting complete equilibrium stress-strain diagrams,” Probl. Prochn., No. 12, 104–106 (1981).
N. G. Chausov, “The kinetics of fracture of structural materials under static loading,” Author's Abstract of Doctoral Dissertation, Kiev (1983).
V. A. Borisenko and V. P. Krashchenko, “Installation for investigating the strength of materials at high temperatures by the methods of microhardness and of tension-compression,” Probl. Prochn., No. 1, 106–110 (1975).
V. P. Krashchenko and V. E. Statsenko, “Installation for investigating the strength of materials at different loading rates in a broad range of temperatures,” Zavod. Lab.,46, No. 1, 88–90 (1980).
V. P. Krashchenko, “Investigation of the correlations between the characteristics of hardness and strength of materials of different classes at high temperatures (from 0.1 to 0.9Tmp),” Author's Abstract of Doctoral Dissertation, Kiev (1976).
V. A. Borisenko, V. P. Krashchenko, V. E. Statsenko, and V. K. Kharchenko, “The effect of the temperature and of the strain rate on the mechanical properties of low-alloy niobium alloy,” Probl. Prochn., No. 12, 77–78 (1979).
A. T. Tumanov (ed.), S. I. Kishkina and N. M. Sklyarov (vol. eds.), Methods of Testing, inspecting, and Investigating Engineering Materials (Handbook) [in Russian], Vol. 2, Methods of Investigating the Mechanical Properties of Metals, Mashinostroenie, Moscow (1974).
R. W. Honeycombe, Plastic Deformation of Metals, St. Martin (1968).
V. P. Krashchenko and V. E. Statsenko, “The effect of temperature and strain rate on the strength of tantalum. Communication 1. Mechanical properties,” Probl. Prochn., No. 2, 76–80 (1981).
V. P. Krashchenko and V. E. Statsenko, “The effect of temperature and strain rate on the strength of tantalum. Communication 2. Mechanisms and processes of the course of plastic deformation,” Probl. Prochn., No. 3, 63–65 (1981).
A. A. Lebedev, V. P. Lamashevskii, and P. T. Alfimov, “Investigation of the effect of the rigidity of testing machines on the regularities of deformation and fracture of structurally inhomogeneous materials,” Probl. Prochn., No. 7, 64–67 (1982).
A. A. Lebedev, N. G. Chausov, O. I. Marusii, and L. V. Zaitseva, “Investigation of the kinetics of fracture of ductile materials at the final stage of deformation,” Probl. Prochn., No. 1, 12–18 (1982).
Additional information
Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Problemy Prochnosti, No. 9, pp. 81–85 September, 1984.
Rights and permissions
About this article
Cite this article
Krashchenko, V.P., Statsenko, V.E. & Rudnitskii, N.P. Effect of the rigidity of testing machines on the obtained temperature dependences of the strength and ductility characteristics. Strength Mater 16, 1309–1313 (1984). https://doi.org/10.1007/BF01530011
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01530011