Literature Cited
O. N. Romaniv, Ya. N. Gladkii, and Yu. V. Zima, “Effect of structural factors on the kinetics of fatigue cracks in structural steels”, Fiz. Khim. Mekh. Mater., No. 2, 3–15 (1978).
T. Tsuneshichi and T. Nobory, “Fatigue strength of 18% Ni maraging steel and the effect of distributed inclusions”, Bull. JSME,20, No. 148, 1212–1221 (1977).
Procedure Instructions. Calculations and Strength Tests in Engineering. Methods of Mechanical Testing of Metals. Determination of Crack Propagation Resistance (Cracking Resistance) in Cyclic Loading, 2nd edition [in Russian], All-Union Scientific Research Institute of Engineering, Moscow (1981).
S. E. Gurevich and L. D. Edidovich, “Rate of crack propagation and threshold values of the stress intensity factor in the fatigue fracture process”, in: Fatigue and Fracture Toughness of Metals [in Russian], Nauka, Moscow (1974), pp. 36–78.
M. N. Georgiev, V. N. Danilova, V. Yu. Dogadushkin, et al., “A method of evaluating the cyclic cracking resistance of low-carbon steels”, Probl. Prochn., No. 8, 18–25 (1981).
Procedure Instructions. Calculations and Strength Tests in Engineering. Methods of Mechanical Testing of Metals. Determination of Fracture Toughness (Cracking Resistance) Characteristics in Static Loading, 2nd edition [in Russian], All-Union Scientific Research Institute of Engineering, Moscow (1979).
C. Servant, G. Maeder, and G. Cizeron, “A small-angle x-ray scattering investigation of the zone formation of maraging alloys”, Met. Trans.,6, No. 5, 981–990 (1975).
G. Maeder, “Structural transformations in a 18% Ni + 9% Co + 5% Mo maraging steel during heat treatment”, Met. Corros.,51, No. 605, 41–67 (1976).
C. Servant, P. Lacombe, and M. Criveau, “The aging characteristics of an Fe, 19Ni, 9Co, 5W alloy”, J. Mater. Sci.,15, No. 4, 859–870 (1980).
Additional information
Leningrad. Translated from Problemy Prochnosti, No. 5, pp. 41–46, May, 1984.
Rights and permissions
About this article
Cite this article
Kramarov, M.A., Mironov, G.I. Effect of aging on the cyclic cracking resistance of 003N18K9M5T maraging steel. Strength Mater 16, 656–663 (1984). https://doi.org/10.1007/BF01529046
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01529046