Literature Cited
A. G. Evans and T. G. Langdon, Structural Ceramics [Russian translation], Metallurgiya, Moscow (1980).
B. A. Gryaznov, “Endurance of creep-resisting cermets in a complicated stress state and at high temperatures,” in: Problems of High-Temperature Strength in Engineering [in Russian], G. S. Pisarenko (ed.), Naukova Dumka, Kiev (1961), pp. 74–85.
V. A. Kuz'menko and G. G. Pisarenko, “Endurance of piezoceramics in cyclic tension-compression loading with a high frequency,” in: Strength of Materials and Structural Members at Sonic and Ultrasonic Loading Frequencies [in Russian], Naukova Dumka, Kiev (1980), p. 223.
J. J. Petrovic and L. A. Jacobson, “The strength of silicon nitride after exposure to different environments,” in: Ceramics for High Performance Applications, J. J. Burke, A. E. Gorum, and R. N. Katz (eds.), Brook Hill, Chestnut Hill (1974), pp. 397–414.
C. W. Marshall and A. Rudnick, “Conventional strength testing of ceramics,” in: Fracture Mechanics of Ceramics, R. C. Bradt, D. P. H. Hasselman, and F. F. Lange (eds.), Vol. 1, Plenum Publ. Corp., New York (1971), pp. 69–92.
G. A. Gogotsi, V. I. Galenko, and V. P. Zavada, “A method of four-point bend testing,” Probl. Prochn., No. 2, 105–110 (1981).
A. P. Diesperova, “A device for testing the strength of materials,” Inventor's Certificate No. 21518, Vest. Komit. Izobret., No. 7.
G. N. Tret'yachenko, “Effect of the accuracy of preparation of cermet materials and of the heating method on the results of the testile test,” in: Problems of Strength of Creep-Resisting Cermets [in Russian], No. 4 (1957), pp. 45–53.
F. J. Baratta, G. W. Driscoll, and R. N. Katz, “The use of fracture mechanics and fractography to define surface finish requirements for Si3N4,” in: Ceramics for High-Performance Applications, J. J. Burke, A. E. Gorum, and R. N. Katz (eds.), Brook Hill, Chestnut Hill (1974), pp. 445–476.
V. A. Kuz'menko, “Using ultrasound for examining the endurance of cermets,” in: Problems of Strength of Creep-Resisting Cermets [in Russian], No. 4 (1957), pp. 127–137.
V. A. Kuz'menko, Sonic and Ultrasonic Oscillations in Dynamic Tests of Materials [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1963).
V. A. Kuz'menko, A. G. Trapezon, B. Z. Kruk, and N. N. Pis'mennyi, “Analysis of the stress state of stepped specimens used in fatigue bend tests,” Probl. Prochn., No. 12, 45–50 (1980).
G. V. Isakhanov, “Examining the creep of silicon carbide cermets,” in: Problems of Creep-Resisting Cermets [in Russian], No. 4 (1957), pp. 54–62.
J. H. Underwood and D. P. Kendall, “Fracture toughness testing using the C-shaped specimen,” in: Development in Fracture Mechanics Test Methods Standardization, W. F. Brown, Jr. and J. G. Kaufman (eds.), ASTM STP No. 632, Philadelphia (1977), pp. 25–38.
A. G. Evans and S. M. Wiederhorn, “Proof testing of ceramic materials — analytical basis for failure prediction,” Int. J. Fract.,10, No. 3, 379–392 (1974).
V. A. Kuz'menko, G. G. Pisarenko, and V. M. Chushko, “Predicting the endurance of piezoceramic elements on the basis of the characteristics of subcritical crack growth,” Probl. Prochn., No. 3, 3–7 (1983).
S. P. Timoshenko and G. N. Goodier, Theory of Elasticity, McGraw-Hill (1970).
O. D. Shcherbina, “Development and examination of structural materials based on the silicon nitride,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Kiev (1976).
G. A. Gogotsi, Strength of Engineering Ceramics [in Russian], Preprint, Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev (1982).
Additional information
Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Problemy Prochnosti, No. 5, pp. 3–6, May, 1984.
Rights and permissions
About this article
Cite this article
Kuz'menko, V.A., Shevchuk, A.D. & Borovik, V.G. Using C-shaped specimens for examining fatigue of ceramics. Strength Mater 16, 607–611 (1984). https://doi.org/10.1007/BF01529037
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01529037