Literature Cited
N. M. Belyaev, “Application of the plastic strain theory in calculating parts for creep at high temperatures,” Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, No. 7 (1943).
Yu. N. Rabotnov, “Calculation of machine parts for creep,” Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, No. 6 (1948).
L. M. Kachanov, Creep Theory [in Russian], Fizmatgiz, Moscow (1960).
O. V. Sorokin and Yu. P. Samarin, Creep in Machine Parts and Equipment [in Russian], Kuibyshevskoe Knizhnoe Izd., Kuibyshev (1968).
V. S. Zhukovskii, “Solution of the problem of stress concentration by means of the grid method,” Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, No. 2 (1964).
A. G. Ugodchikov, M. I. Dlugach, and A. E. Stepanov, Solution of Boundary-Value Problems of Two-Dimensional Elasticity Theory by Means of Digital and Analog Computers [in Russian], Vysshaya Shkola, Moscow (1970).
A. N. Grubin, Nonlinear Problems of Stress Concentration in Machine Parts [in Russian], Mashinostroenie, Leningrad (1972).
Yu. A. Eremin, “Determination of stresses in two-dimensional stress raisers under creep conditions by means of the load release method,” in: New Design Development [in Russian], KuPI, Kuibyshev (1973).
Yu. A. Eremin, “Experimental investigation of two-dimensional stress raisers under creep conditions,” Trudy KuPI, Kuibyshev (1974).
Additional information
Kuibyshev. Translated from Problemy Prochnosti, No. 5, pp. 41–44, May, 1976.
Rights and permissions
About this article
Cite this article
Eremin, Y.A., Sorokin, O.V. Method of solving the two-dimensional problem of stress concentration under creep conditions. Strength Mater 8, 545–548 (1976). https://doi.org/10.1007/BF01528611
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01528611