Literature Cited
L. T. Balatskii, shaft Fatigue in Splices [in Russian], Tekhnika, Kiev (1972).
I. V. Kudryavtsev and N. M. Savvina, in: Problems of the Design Strength of Steel [in Russian], Mashgiz, Moscow (1957).
B. G. Gurevich, in: Investigations on the Strengthening of Machine Components [in Russian], Mashinostroenie, Moscow (1972).
L. M. Shkol'nik, Increasing the Strength of Axles on Rolling Railroad Stock [in Russian], Transport, Moscow (1964).
M. A. Balter, B. G. Gurevich, and M. L. Turovskii, in: Increasing the Longevity of Machine Components by the Method of Surface Work Hardening [in Russian], Mashinostroenie, Moscow (1965).
V. S. Sumtsov, M. L. Turovskii, et al., Vestnik Mashinostroeniya, No. 11 (1973).
M. Ya. Fuks and L. I. Gladkikh, Zavod. Lab., No. 8 (1965).
V. Hauk, Archiv f. Eisenhüttenwessen,38, No. 3 (1968).
G. K. Trubin, Contact Fatigue of Materials Used for Gearing [in Russian], Mashgiz, Moscow (1962).
Additional information
Khar'kov Polytechnical Institute, Khar'kov. Translated from Problemy Prochnosti, No. 1, pp. 105–109, January, 1976.
Rights and permissions
About this article
Cite this article
Turovskii, M.L., Belozerov, V.V., Shifrin, I.M. et al. Fatigue strength and residual stresses in the seating zone of a coupling sleeve in plane bending. Strength Mater 8, 104–109 (1976). https://doi.org/10.1007/BF01528227
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01528227