Literature Cited
Yu. G. Veksler, “Contact strength of metals and alloys in high-speed gaseous streams,” in: Contact Strength of Metallic Materials, Proceedings of the S. M. Kirov Ural Polytechnic Institute, No. 210, Sverdlovsk (1972).
Yu. G. Veksler, V. G. Sorokin, and B. N. Guzanov, “Short-term creep of metals in vacuo, in air, and in a high-speed air stream,” Fiz. i Khim. Obrabotka Metal., No. 6 (1972).
T. N. Gordeeva, S. T. Kishkin, et al., “Effect of test conditions on state of surface layer of blades in nozzle apparatus,” in: Heat-Resistant Coatings, Leningrad (1968).
V. G. Sorokin and B. N. Guzanov, “Method of determining mechanical properties of metallic materials under conditions of dynamic contact with an air stream,” Proceedings of the Higher Institutes of Learning of the Russian Soviet Federated Socialist Republic, No. 1, Heat Treatment and the Physics of Metals, Sverdolovsk (1973).
A. Ingard, Kvernes, and Per Kofstat, “The oxidation behavior of some Ni−Cr−Al alloys at high temperatures,” Met. Trans.,3, No. 6 (1972).
V. N. Gridnev and A. I. Efimov, “Analysis of the carburized state and the character of surface-layer breakdown on nozzle blades,” in: The Fracture Mechanism of Metals [in Russian], Naukova Dumka, Kiev (1966).
V. N. Gridnev, A. I. Efimov, et al., “The behavior of nozzle blades under steady and nonsteady heating conditions,” in: Problems of the Physics of Metals and Metallography [in Russian], No. 18, Izd-vo Akad. Nauk SSSR, Kiev (1964).
Additional information
S. M. Kirov Ural Polytechnic Institute, Sverdlovsk. Translated from Problemy Prochnosti, No. 6, pp. 83–85, June, 1976.
Rights and permissions
About this article
Cite this article
Veksler, Y.G., Guzanov, B.N. & Sorokin, V.G. Relationship between mechanical properties of metals subjected to tension tests in high-speed gaseous streams. Strength Mater 8, 707–710 (1976). https://doi.org/10.1007/BF01528135
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01528135